Maintenance After A Prolonged Period Of Non-Operation; Hints And Tips; Technical Problems - Currys ESSENTIALS CDW45W13 Instruction Manual

Maintenance After a Prolonged Period of Non-Operation

If you are not going to use the unit for a prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any
residual water in the pipes.
3. Slightly open the door to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.

Hints and Tips

Repairs should only be carried out by a qualified technician in strict accordance with current local and national
safety regulations. Unauthorised or incorrect repairs could cause personal injury or damage to the unit.
Before calling for service, please refer to the "Technical Problems" and "General Problems" sections to solve
some general problems by yourself.

Technical Problems

Problem
Dishwasher does not start.
3 in 1 program light is blinking
rapidly
1 hour light is blinking rapidly
The drain pump is not working
properly.
30
Possible Causes
The door is not properly
closed.
The unit is not connected to
the mains socket.
The unit is not switched on.
Water tap is not turned on.
Low water pressure
(<0.04MPa)
Flow meter is broken.
The wire terminals which
connect the flow meter are
loose.
The float switch is broken or
PCB is faulty.
The wire terminal connected
to the float switch is loose or
broken.
The anti-flooding system has
operated.
Remedy
Close the door firmly.
Connect the mains plug to the mains
socket.
Press the On/Off button and select a
programme.
Turn on the water tap.
Turn on the water tap and ensure it is
in full position.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.