Set Install Preferences - Motorola 68014301013 User Manual

Note: Not all vehicle entertainment systems offer a stereo
auxiliary audio input. In some cases, if your system does
not support this input, one may be created using an adapter
from a third-party vendor.
1 Connect an RCA cable (not supplied) to connector E on
the ISO cable.
2 Connect the other connectors on the RCA cable to the
vehicle entertainment system's Auxiliary input.
3 From the Installer menu, set the Line Out parameter to
ON (see "Set install preferences" on page 11 for
details).

Set install preferences

1 Turn off your vehicle's ignition.
2 Turn on your vehicle's ignition while pressing and
holding the Green button for at least 5 seconds.
Installer Menu
Note: See page 13 for location of buttons and knobs
on UIM.
3 Use the scroll knob to view and change settings.
Setting...
Language set language displayed on the UIM.
Display set the display orientation for left- or
Orientation right-hand operation.
Line Out set to ON when using an auxiliary
input to your vehicle entertainment
system for music.
Privacy Mute set whether to unmute the vehicle
entertainment system when a call is
switched to privacy mode.
Install Test test and verify:
ignition source
left-side speakers
right-side speakers
auxiliary input to vehicle
entertainment system (if used).
Factory reset all settings back to standard
Reset default factory settings
About list car kit's software version
4 Turn vehicle's ignition off and on to store settings.
Installation 11