How To Connect To A Bluetooth Compatible Device (Pairing); For Bluetooth Compatible Device With Ssp (Secure Simple Pairing); For Bluetooth Compatible Device Without Ssp (Secure Simple Pairing); Auto Pairing With An Ipod/Iphone - Alpine CDE-193BT Operating Instructions Manual

How to connect to a Bluetooth
compatible device (Pairing)
For details on the control from a Bluetooth compatible device, refer to
the Owner's Manual of the Bluetooth compatible device.
1
Using your Bluetooth compatible device, select the
"ALPINE", etc. for pairing.
For Bluetooth compatible device with SSP
(Secure Simple Pairing)
2-1
Turn the Rotary encoder to select "PAIR YES", and then
press ENTER.
If "PAIR NO" is selected, the connection will be cancelled.
For Bluetooth compatible device without SSP
(Secure Simple Pairing)
2-2
Input the PIN code ("0000") in a Bluetooth compatible
device.
Note
• The PIN code is fixed as "0000".
3
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.

Auto pairing with an iPod/iPhone

When an iPod/iPhone is connected to the USB port, the unit will
automatically pair with it.
1
Make sure USB PAIR is set to ON. Refer to "Setting the Auto
Pairing with iPod/iPhone" on page 32.
2
Connect an iPod/iPhone to this unit's USB port.
3
Turn the Rotary encoder to select "PAIR YES", and then
press ENTER.*
If "PAIR NO" is selected, the connection will be cancelled.
* Depending on the iOS version, you may need to turn on the
Bluetooth function manually on the iPod/iPhone side, then
perform this step.
4
If pairing is successful, "CONNECTED" is displayed for a
few seconds. The head unit then returns to its previous
state.
Notes
• If the device has been paired with this unit previously, it will not USB
Pair automatically.
• If the connection is unsuccessful, "FAILED" is displayed.
• After a successful pairing, the device and this unit should connect
automatically whenever the vehicle's ignition is turned ON. If the auto
reconnect fails, try to connect manually.
• Set "VISIBLE M" to ON, so this unit is visible to other Bluetooth
compatible devices. Refer to "Setting the Visible Mode" on page 32.

Bluetooth SETUP

The following steps 1 to 5 are common to the various Bluetooth
functions. For details, refer to each individual function.
Note
• Set BT IN to ON, and then perform Bluetooth SETUP operation. Refer
to "Setting the Bluetooth Connection (BT IN)" on page 31.
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select "BLUETOOTH", and then
press ENTER.
The Bluetooth setup mode is activated.
3
Turn the Rotary encoder to select the desired items, and
then press ENTER.
BLUETOOTH:
*1
 USB PAIR  PAIRED DEV  VISIBLE M 
BT IN
CALL SOUND  CALLER ID  PB UPDATE
*2
 FW VERSION  FW UPDATE
SPEAKER SL
*1 The items are not displayed during a phone call.
*2 If you switch the 2WAY/3WAY system (page 23) to 3WAY
mode, you cannot adjust this item.
4
Turn the Rotary encoder to change the settings.
5
Press and hold YSETUP for at least 2 seconds.
The SETUP mode is cancelled.
Notes
• Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the Bluetooth Connection
(BT IN)
With Bluetooth technology, you can place a hands-free call by a
Bluetooth-equipped Smartphone.
Audio information of a Bluetooth compatible Smartphone, a portable
audio player, etc., is controllable/playable wirelessly from this unit.
 Setting item: BT IN
Setting contents:
OFF / ON (Initial setting)
OFF:
Hands-Free Phone function and Bluetooth Audio function are
disabled.
ON:
Select when you want to pair your Bluetooth compatible phone
with this unit or use Bluetooth Audio function.
Note
• When BT IN is set to OFF, the indicators related to Hands-free phone
( battery charge and signal strength) will not be displayed.
*1
 PB ORDER 
*1
31
-EN