Page 2
PS900 TREADMILL OWNERS MANUAL IMPORTANT: All Products shown are prototype. Actual product delivered may vary. Product specifications, features & software are subject to change without notice. For the most up to date owner’s manual please visit www.truefitness.com. For documents in additional languages please visit www.truefitness.com/document-library/29/international-manuals IMPORTANTE: Todos los productos mostrados son prototipos.
Page 3
The proud manufacturing tradition of quality and the culture of innovation at TRUE have given rise to a full line of truly extraordinary treadmills, indoor cycles and elliptical cross-trainers. As a result, people all over the world are benefiting from the TRUE experience.
PS900 TREADMILL OWNERS MANUAL TABLE OF CONTENTS : Chapter 1: Safety Instructions Chapter 5: Care & Maintenance Safety Instructions Care & Maintenance Use of Safety Key Cleaning the Equipment Space Requirements Running Belt Alignment Grounding Instructions Tensioning the Running Belt...
45, smokes, has high cholesterol, is obese or has not exercised regularly in the past year. Additionally, TRUE recommends consulting a fitness professional on the correct use of this product.
Page 6
To disconnect, turn power OFF at the ON/OFF switch if applicable, then remove plug from electrical outlet. • Never operate a TRUE product if it has a damaged power cord or electrical plug, or if it has been dropped, damaged, or even partially immersed in water. Contact TRUE Customer Service for a replacement.
Page 7
CHAPTER 1: SAFETY INSTRUCTIONS CAUTION (continued): • Use correct ergonomic positioning while running on treadmill. • Do not allow animals on or near the equipment while in operation. • Use the side handrails whenever additional stability is required. In case of emergency, such as tripping, the side handrails should be grabbed and the user should place his/her feet on the side platforms.
SPACE REQUIREMENTS: Space Requirements: TRUE’s recommendation is to leave a minimum of 20” (0.5m) on each side of the treadmill and a 79” (2 m) safety zone at the rear of the treadmill. (See Fig 1) Truefitness.com / 800.426.6570 / 636.272.7100...
CHAPTER 1: SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS: This product must be grounded, if it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
CHAPTER 1: SAFETY INSTRUCTIONS WARNING DECALS: WARNING: Replace warning labels that may be worn, damaged or missing To replace any worn or missing warning decals contact TRUE FITNESS by visiting www.truefitness.com or contact customer service at 800-883-8783. COMPLIANCES: This equipment complies with all applicable codes and regulations. For a complete list of compliances, please visit www.truefitness.com...
Important Electrical Requirements – 120V: Your TRUE treadmill requires a dedicated 120 volt, alternating current (AC), 20 amp grounded outlet circuit. This means nothing else can be plugged into the same circuit. Most power circuits are rated for this 120V AC 20 amp requirement, but you must ensure the treadmill does not share the circuit with anything else.
CHAPTER 2: ASSEMBLY INSTRUCTIONS TREADMILL ASSEMBLY STEPS: CAUTION: • Use caution when assembling treadmill. Unpacking and assembling of this treadmill is a two person task. • Remove all treadmill components from packaging. 1. Remove 9 bolts (m), Left and Right motor decoration covers and upper motor cover.
Page 16
CHAPTER 2: ASSEMBLY INSTRUCTIONS TREADMILL ASSEMBLY STEPS (continued): 9) Rear Foot Leveling: a) Ensure treadmill incline rack wheels and rear feet are resting on the floor and not on cardboard, packaging, etc. b) Using the pliers to loosen the wing-nut (A) counter-clockwise. c) Using a level or estimating by sight, turn section (B) of foot counter-clockwise to a proper height.
Page 17
CHAPTER 2: ASSEMBLY INSTRUCTIONS TREADMILL ASSEMBLY STEPS (continued): 11) Run Treadmill Calibration: WARNING: This process will take full control of the treadmill and can be dangerous if caution is not taken. • Calibration can take up to two minutes to complete. •...
CHAPTER 3: PRODUCT OVERVIEW TREADMILL OVERVIEW (continued): Console Assembly: The console allows the user to set up a workout program and control the treadmill during a workout (For console overview and operation instructions refer to chapter 4). Contact Heart Rate Pads: Allows the user to check their heart rate without wearing a wireless chest strap.
CHAPTER 4: PROGRAMMING & OPERATION CAUTION: The safety key must be in place on the treadmill console, and should be attached to the user’s clothing. The treadmill will not operate if the safety key is not attached to the console. HEART RATE MONITORING: This treadmill can monitor a user’s heart rate using either a Polar®...
HEART RATE CONTROL (HRC): Introduction: You are now the owner of the most sophisticated Heart Rate Control treadmill available. TRUE HRC is unique and patented. It accommodates users from rehabilitation to world class athletes, and all those in between. TRUE HRC allows users to do a completely hands free heart rate controlled workout using speed, incline or both.
CHAPTER 4: PROGRAMMING & OPERATION HEART RATE CONTROL (continued): Heart Rate Control Stage: The treadmill takes control of speed and incline, keeping the user’s heart rate within a few bpm of their target. When using the Interval HRC Workout, the treadmill alternates between work and rest intervals. Cool-Down: At the end of the workout time or distance, the treadmill reduces the workout intensity by half and goes back into Manual Control mode, where users directly control their cool-down.
Page 23
CHAPTER 4: PROGRAMMING & OPERATION CONSOLE OVERVIEW (continued): Console Display: Used to monitor or control a work out and feature navigation. Workout Keys: Allows the user to select one of the preset workouts, heart rate control workouts or custom workouts. Incline Keys: Manually increases or decreases the incline of the treadmill.
CHAPTER 4: PROGRAMMING & OPERATION PROGRAM DESCRIPTIONS: Quick Start: A workout in which the user controls all settings. The workout continues until it is ended by the user. • Pressing START begins the workout. • Adjust speed or incline at any time by using the dedicated SPEED and INCLINE keys. •...
Page 25
CHAPTER 4: PROGRAMMING & OPERATION PROGRAM DESCRIPTIONS (continued): Cardio Challenge: SPEED and INCLINE increase to a maximum at the mid-point of the workout, Level Max Speed Max Incline then decrease to the finish. INCLINE and SPEED changes affect the current 2.4 mph 4.0% segment only.
WARNING: Misconfiguration of the console may cause damage to the unit and void the manufacturer warranty. If necessary, please contact TRUE Fitness Technical Support at 800-883-8783 for assistance. Diagnostics Mode: Diagnostics mode contains several tools and information that are useful in diagnosing technical issues.
Page 27
Backlight – Increase or decrease the brightness of the console display (use the + and - speed keys). Contrast – Increase or decrease the contrast of the console display (use the + and - speed keys). (The Video Disabled, TV Model and DVD Model options are not used on the PS900 treadmill) Calibration Mode: Calibration mode will conduct a basic test of the drive and incline systems to ensure that they are operating as intended.
CAUTION: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and may void the TRUE Fitness Warranty. Never pour water or spray liquids on any part of the treadmill. Allow the treadmill to dry completely before using.
If you hear any chafing or the running belt appears to be getting damaged, stop the running belt immediately by pressing the STOP key. Contact the TRUE Service Department. Walk around to the rear of the unit and observe the belt for a few minutes.
Turn the treadmill on and start the belt and check if the slipping continues. Repeat the above steps if additional adjustment is necessary. TREADMILL LUBRICATION: For commercial use over 20 hours per week, TRUE recommends lubricating every three months. • Loosen the belt adjustment bolts in the rear end caps. •...
OTHER SCHEDULED PREVENTIVE MAINTENANCE: TRUE recommends that quarterly scheduled maintenance be performed by a qualified service technician. Please contact your dealer or visit www.truefitness.com to contact a local TRUE authorized service technician. Scheduled Preventive Maintenance: Record time, distance and hours from the console.
HOURS OF OPERATION: 8:30 A.M. - 5:00 P.M. CST E-MAIL: service@truefitness.com CONTACTING SALES: Interested in TRUE Product? Please contact us with any sales or product inquires so that we may direct you to the appropriate sales representative to answer your questions. TRUE FITNESS HOME OFFICE 865 HOFF ROAD ST.
Please make sure the photos include the damaged product as well as the damaged box the product arrived in. Contact the TRUE Fitness customer support team by calling 800.883.8783 or sales support team by calling 800.426.6570 Monday-Friday during normal business hours.
This troubleshooting guide is intended to assist in diagnostics only and is not all inclusive. Technical specifications, error codes and programming are subject to change without notice. TRUE accepts no liability for any damage or loss suffered by persons whom rely wholly or in part on any description or statement contained within this manual. Please visit www.truefitness.com to obtain the most recent version of all manuals and contact the TRUE Service Department at 800-...
Page 35
Inspect under the unit. Remove and object that may be under walking belt the unit. Foreign object may be stuck in Rubbing sound Contact True Fitness Customer Service Department motor compartment from treadmill when in operation Roller bearings may be damaged...
Page 36
Corrective Action Invalid potentiometer feedback Loss of data cable connectivity Disconnected or misaligned limit Elevation Stall Contact TRUE Fitness Customer Service Department switch No power to incline motor Blown fuse on lower control board Worn belt and deck Misaligned speed sensor...
TRUE Fitness prides itself on manufacturing the world’s highest quality cardio equipment to fit every facility and every budget. The PS900 is the embodiment of that philosophy. This treadmill will deliver superior quality to meet all of your customers' needs. ...
Page 38
1" (0.8 cm) Medium Density Fiberboard Belt Siegling Multi-Ply with PVC Coating Rollers 3" (8 cm) w/ Sealed Bearings Impact System True Soft System Frame Construction Robotically Welded Heavy-Gauge Steel Lubrication Silax Speed Range 0.5 to 12.0 MPH (0.8 to 19.3 km/H)
Product. The frame is warranted for labor and freight (for parts Hours of operation 8:30am - 5:00 pm CST shipped from TRUE) for one year from date of purchase. * This limited warranty on structural frame does not include paint or The above Limited Warranty is subject to and will be in coatings.
Page 40
Product remains in the possession of the original purchaser and is not transferable. The PS900 treadmill comes with one serial number on the base 3. This Limited Warranty becomes VALID ONLY if the Product of the machine. This serial number is located on the motor is initially assembled/installed by a TRUE authorized dealer/ cover above the on/off switch.
Page 41
PS900 Treadmill Thank you for purchasing a TRUE product. To validate the TRUE product warranty the fast and easy way, please go on-line now to truefitness.com/support and register your product. The information you provide will never be distributed to any other individuals or agencies for any purpose.
All TRUE® Fitness products are distributed by TRUE and are warranted parts warranty period. This limited warranty does not cover damage to the original registered Product purchaser and the parts of the TRUE or equipment failure resulting from or caused by improper assembly/ product (the “Product”) listed below, under normal use and service,...
Page 43
7. This Limited Warranty is in lieu of all warranties, express or implied, and in lieu of all other obligations or liabilities on the part of TRUE, under no circumstances shall TRUE be liable by virtue of this Limited...
Page 44
If you prefer to mail your warranty card, have the owner of the product complete the information below and return it to TRUE Fitness within 30 days from the date of equipment installation.
Need help?
Do you have a question about the PS900 and is the answer not in the manual?
Questions and answers