Table of Contents
Advertisement
INDEX
Page
Contents
2
5
6
7
9
18
24
25
26
S ENIUS SPOT
INSTRUCTION MANUAL
Congratulations on choosing a Clay Paky product
We thank you for your custom.
Please note that this product, as all the others in the rich Clay
Paky range, has been designed and made with total quality to
ensure excellent performance and best meet your expectations
and requirements.
1
C61500
Advertisement
Table of Contents
Related Manuals for Clay Paky scenius spot
Summary of Contents for Clay Paky scenius spot
-
Page 1: Table Of Contents
S ENIUS SPOT C61500 INSTRUCTION MANUAL INDEX Congratulations on choosing a Clay Paky product Page Contents We thank you for your custom. Please note that this product, as all the others in the rich Clay Safety Information Paky range, has been designed and made with total quality to... -
Page 2: Safety Information
CLAY PAKY S.p.A. disclaims all liability for damage to the fitting or to other property or persons deriving from installation, use and maintenance that have not been carried out in conformity with this instruction manual, which must always accompany the fitting. - Page 3 • Photobiological Safety Risk Group 2 According to EN 62471 The fixture must be positioned so that the minimum distance between the front lens and human eye is at least 3 metres to prevent personal photobiological risks. This product is intended for the following areas of application: studios, stages, theaters, exhibitions, trade fairs, events, theme parks, entertainment venues, architectural lighting and similar.
- Page 4 Ref: [FIS00L – Safety Information Scenius] COME OTTENERE LE INFORMAZIONI DI SICUREZZA NELLA VERSIONE MULTILINGUE Puoi sempre scaricare la versione multilingue delle Informazioni di Sicurezza per questo prodotto Clay Paky al seguente link: http://www.claypaky.it/en/download Rif: [FIS00L – Safety Information Scenius] SO ERHALTEN SIE IHR INFORMATIONEN ZUR SICHERHEIT IN DER MEHRSPRACHIGEN VERSION Sie können die mehrsprachige Version des Handbuchs mit Sicherheitshinweisen fü...
-
Page 5: Unpacking And Preparation
UNPACKING AND PREPARATION 2 x 183102/805 LAM00D (fitted into fixture) Packing contents - Fig. 1 UNLOCKED LOCKED UNLOCKED LOCKED PAN Mechanism Lock and Release (every 90°) - Fig. 2 TILT Mechanism Lock and Release (every 45°) - Fig. 3 S ENIUS SPOT... -
Page 6: Installation And Start-Up
INSTALLATION AND START-UP Installing the projector - Fig. 4 The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request). This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base. -
Page 7: Control Panel
CONTROL PANEL Mains Connecting to the mains supply - Fig. 6 DMX 512 5 PIN SCREEN SIGNAL SIGNAL Connecting to the control signal line (DMX) - Fig. 7 Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use microphone cable or other cable with characteristics differing from those specified. -
Page 8: Level
Reversal of the display - Fig. 9 To activate this function, press UP and DOWN keys simultaneously while the display is in the rest mode. This status will be memorised and maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again. Setting the projector starting address On each projector, the starting address must be set for the control signal (addresses from 1 to 512). -
Page 9: Menu Setting
MENU SETTING Main Menu Level 1 Level 2 Level 3 Choices / Values DMX Address 001-512 Standard Channel Mode Vector Fixture ID 000-255 Disabled Art-net IP 2.x.x.x. Control Protocol Art-net IP 10.x.x.x. Art-net Custom IP Disabled Repeat on DMX Enabled on primary Universe 000-255 Ethernet Interface... -
Page 10: Channel
Main Menu Level 1 Level 2 Level 3 Choices / Values System Errors Read / Reset Total Hours Read Fixture Hours Partial Hours Read / Reset Total Hours Read Lamp Hours Partial Hours Read / Reset Total Strikes Read Lamp Strikes Partial Strikes Read / Reset CPU brd... -
Page 11: Channel
Main Menu Level 1 Level 2 Level 3 Choices / Values Lamp On / Off ANUAL Reset Yes / No ONTROL Channel Value / Percentage Pan / Tilt n.a. Colour n.a. Beam n.a. Gobo n.a. n.a. Are you sure ? Upload Firmware Transfer …….. -
Page 12: Channel
SET UP MENU DMX ADDRESS PLEASE NOTE: Without the DMX input signal, the displayed address (DMX Address) blinks. It lets you select the address (DMX Address) for the control signal. A DMX address between 001 and 512 can be selected. CHANNEL MODE This lets you select the projector operating mode, selecting one of the two available modes: Standard (32 DMX channels occupied, see DMX-Channel Function) -
Page 13: Channel
OPTIONS MENU LAMP DMX It lets you enable (ON) the lamp remote control channel. Select OFF to turn off or disable this option. PAN / TILT Invert Pan It lets you enable (ON) Pan reverse movement. Select OFF to turn off or disable this option. Invert Tilt It lets you enable (ON) Tilt reverse movement. -
Page 14: Channel
SHUTTER Shutter on error It lets you activate (ON) automatic "Stopper/Strobe" closing in the event of Pan/Tilt positioning error. Select OFF to turn off or disable this option. Dimmer on Shutter Enables (select ON) the automatic closing of the Dimmer when the Strobe is completely closed. Select OFF to turn off or disable this option. -
Page 15: Channel
INFORMATION MENU SYSTEM ERRORS It displays a list of errors that occurred when the projector was turned on. To reset the SYSTEM ERRORS list, press OK. A confirmation message appears (Are you sure you want to clear error list?). Select YES to confirm reset. FIXTURE HOURS It lets you view projector working hours (total and partial). -
Page 16: Channel
FANS MONITOR It lets you view the speed of each fan installed in the projector: Lamp (lamp cooling fan) Pwr.Sup (PSU cooling fan) Ball.IN (Ballast cooling fan, air-flow IN) Ball.OUT (Ballast cooling fan, air-flow OUT) Effect.IN (Effects cooling fan, air-flow IN) Effect.OUT (Effects cooling fan, air-flow OUT) SENSOR STATUS It lets you check the correct operations of each "sensor”... -
Page 17: Channel
MANUAL CONTROL LAMP It lets you turn the lamp on (ON) or off (OFF) from the projector control panel. RESET It lets you reset the projector from the projector control panel. CHANNEL It lets you set the channel DMX levels from the projector control panel (value between 0 and 255 bit or between 0% and 100%). -
Page 18: Maintenance
MAINTENANCE 1/4 Turn 1/4 Turn Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section. Opening the head covers - Fig. 10. Closing the head covers - Fig. 11. S ENIUS SPOT... -
Page 19: Colour
• General cleaning of internal parts. • Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky. • General visual check of the internal components, cabling, mechanical parts, etc. - Page 20 Cleaning of the filters - Fig. 13. S ENIUS SPOT...
- Page 21 Upper Side Lower Side Lamp change - Fig 15 Take the new lamp out of its package and insert in the fitting. WARNING: do not touch the lamp s envelope with bare hands. Should this happen, clean the bulb with a cloth soaked in alcohol and dry it with a clean, dry cloth.
- Page 22 Replacing rotating gobos (ø 32.8 mm - max 26 mm image – thickness 1.1 mm) - Fig. 18 - Before use custom gobos contact Clay Paky; - The original gobos have a special coating designed specifically to resist to the high temperatures;...
- Page 23 Battery removal - Fig. 19 This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. LiFePO4 S ENIUS SPOT...
-
Page 24: Technical Information
TECHNICAL INFORMATION (22.99") (22.24") (19.13") (29.92") (25.39") (16.14") (14.17") Power supplies IP rating Control and programming: 200/240V 50/60 Hz • IP20 • 32 or 36 DMX 512 control channels • Protected against the entry of solid bodies • DMX protocol signal: USITT DMX 512 Input power larger than 12mm (0.47”). -
Page 25: Cause And Solution Of Problems
CAUSE AND SOLUTION OF PROBLEMS THE PROJECTOR WILL NOT SWITCH ON ELECTRONICS NON-OPERATIONAL PROBLEMS DEFECTIVE PROJECTION REDUCED LUMINOSITY POSSIBLE CAUSES CHECKS AND REMEDIES No mains supply. Check the power supply voltage. Lamp exhausted or defective. Replace the lamp. (See instructions). Signal transmission cable faulty or disconnected. -
Page 26: Channel Functions
CHANNEL FUNCTION NB: To prevent accidental breakage of the effects, which could collide with each other during transport, SCENIUS SPOT before switching the projector OFF check that all the projector Channels have been excluded (DMX level = 0 bit). CHANNEL MODE... -
Page 27: Channel
Channel Mode Function Value Standard Vector CYAN COLOUR WHEEL 0 - 255 Linear Cyan movement MAGENTA COLOUR WHEEL 0 - 255 Linear Magenta movement YELLOW COLOUR WHEEL 0 - 255 Linear Yellow movement CTO COLOUR WHEEL 0 - 255 Linear CTO movement COLOUR 0 - 15 Color 1 tbd... -
Page 28: Channel
Channel Mode Function Value Standard Vector ROTATING GOBO 1 CHANGE 0 - 18 Empty position 19 - 37 Gobo 1 38 - 56 Gobo 2 57 - 74 Gobo 3 75 - 92 Gobo 4 93 - 111 Gobo 5 112 - 129 Gobo 6 130 - 150... -
Page 29: Channel
Channel Mode Function Value Standard Vector FINE GOBO 2 ROTATION 0 - 255 Fine Gobo Indexing ANIMATION DISK INSERTION or STATIC GOBO WHEEL 0 - 255 Linear Animation Disk Insertion ANIMATION DISK ROTATION Continuous animation disk clockwise rotation at linearly variable speed 0 - 124 from fast (180 rpm) to slow (4.4 rph) 125 - 130... -
Page 30: Channel
Channel Mode Function Value Standard Vector FINE TILT 0 - 255 Fine Tilt positioning FUNCTION 0 - 11 Unused range 12 - 24 Fast Pan / Tilt speed (default) 25 - 37 Normal Pan / Tilt speed 38 - 50 Conventional Dimmer curve 51 - 62 Linear Dimmer curve (default) - Page 31 TIME TABLE Seconds Seconds Seconds Seconds Seconds Seconds Full 10.2 10.4 10.6 Follow cue Data S ENIUS SPOT...
- Page 32 CLAY PAKY - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it S.p.A.
Need help?
Do you have a question about the scenius spot and is the answer not in the manual?
Questions and answers