Specifications - Sony BDP-S3700 Operating Instructions Manual
Blu-ray disc dvd player
Hide thumbs
Also See for BDP-S3700:
- User manual ,
- Operating instructions manual (20 pages) ,
- Operating instructions (2 pages)
Table of Contents
Advertisement
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, While the player is turned on, press x
STOP, HOME, and then TOP MENU
button on the remote to unlock the tray
and disable the Child Lock (page 11).
, Try the following:
off, and disconnect the AC adaptor.
Reconnect the AC adaptor while
2
pressing down Z on the player.
Keep pressing down Z on the player
3
until the tray opens.
disc.
Disconnect and reconnect the
5
AC adaptor again to recover the
player.
The message [[EJECT] Key is
currently unavailable.] appears on
the screen after Z is pressed.
, Contact your nearest Sony dealer or
local authorized Sony service facility.
The player does not respond to any
button.
, Moisture has condensed inside the
player (page 4).
Turn the player
1
Remove the
4
Specifications
System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load
impedance)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT: HDMI 19-pin standard
connector
LAN (100): 100BASE-TX Terminal
USB:
USB jack Type A (For connecting a
USB memory, memory card reader,
digital still camera, and digital video
camera)*
* Do not use for power charging
purposes.
DC IN:
BDP-S3700/BX370: 12 V DC,
650 mA
BDP-S1700: 12 V DC, 600 mA
Wireless (BDP-S3700/BX370 only)
Wireless LAN standard:
Protocol IEEE 802.11 b/g/n
Frequency range:
2.4 GHz band: Channels 1-11
Modulation: DSSS and OFDM
General
Power requirements:
12 V DC with AC adaptor
Rating: Input 120 V AC, 60 Hz
Power consumption (when using AC
adaptor):
BDP-S3700/BX370: 9.2 W
BDP-S1700: 8.5 W
Dimensions (approx.):
230 mm × 194 mm × 39 mm
1
3
(9
/
in. × 7
/
8
4
(width/depth/height)
incl. projecting parts
Mass (approx.): 0.8 kg (1 lb 13 oz)
9
in. × 1
/
in.)
16
35
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BDP-S3700 and is the answer not in the manual?
Questions and answers
Trying to hook up to a Polaroid tv with a hdmi cable and it says no signal
To connect a Sony BDP-S3700 to a Polaroid TV using an HDMI cable and fix a "no signal" issue, follow these steps:
1. Check Connections – Ensure the High-Speed HDMI cable is securely connected to both the HDMI OUT port on the BDP-S3700 and an HDMI input port on the Polaroid TV.
2. Select the Correct Input – Use the TV remote to switch to the HDMI input where the player is connected.
3. Restart Devices – Power off both the Blu-ray player and TV, unplug them for a few minutes, then reconnect and turn them on.
4. Check HDMI Cable – Try using a different HDMI cable if the issue persists.
5. Enable HDMI Control – If the TV supports HDMI-CEC, ensure [Control for HDMI] in the player’s [HDMI Settings] is set to [On].
6. Test with Another TV – Connect the BDP-S3700 to a different TV to check if the issue is with the player or the Polaroid TV.
If the problem continues, consult Sony support or refer to the TV’s manual for additional HDMI troubleshooting.
This answer is automatically generated