Configuring Upnp - Zte ZXA10 F660 User Manual

Figure 6-10 DDNS Configuration
Table 6-5
Table 6-5 Parameters for DDNS Configuration
Parameter
Enable
Server
Username
Password
Domain
WAN Connection
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
DDNS is configured.

6.3 Configuring UPnP

Short Description
Perform this procedure to configure UPnP.
SJ-20110718111034-001|2011-07-18 (R1.0)
lists the parameters for DDNS configuration.
Description
To enable the DDNS function
Server address
If the GNUDIP
address is a URL address. By default, it is
http://ns.eagleeyes.com.cn/cgi-bin/gdipupdt.cgi.
DDNS server user name
DDNS server password
Domain name corresponding to the user, valid only when the
GNUDIP protocol is used
WAN-side connection interface
Chapter 6 Service Configuration
HTTP protocol is used, the sever
6-11
ZTE Proprietary and Confidential