Smeg SIM592B Instructions For Use & Warranty page 11

ERROR CODE
The hob switches off and after 30 seconds
emits an acoustic signal every 10 seconds.
C81, C82, C83
F42 or F43
F12, F21, F25, F36, F37, F40, F47, F56,
F60, F61, F62, F63, F64
DESCRIPTION
Permanent pressure on the control
zone.
The control panel switches off because
of excessively high temperatures.
The connection voltage is wrong.
Call the After-sales Service and specify the error code.
F58,
POSSIBLE CAUSES
Water or kitchen utensils on the control
zone.
The internal temperature of electronic
parts is too high.
The sensor detects a discrepancy
between the appliance voltage and that
of the mains supply.
EN20
ERROR ELIMINATION
Clean the control zone.
Wait for the hob to cool down
before using it again.
Disconnect the hob from the mains
and check the electrical connection.