Advanced Features; Caring For Your Belt; Error Messages; Music Function - Slendertone Abs5 Instruction Manual

ADVANCED PRODUCT FEATURES
1 Intensity Keylock Function
If you find a comfortable intensity level, press the
upper and lower halves of the left intensity button
to lock that intensity (fig. a). The keylock function
also locks the programme button. This function
only remains active during the session in which it
is activated. Deactivate the keylock function by
performing the same action again. We
recommend that you use this function during the
Ab Crunch programmes in order to prevent any
inadvertent activation of the keys.
2 Mute Function
If you want to switch off your controller's sound
effects, press the information button and the
programme button at the same time (fig. b). The
mute function remains active indefinitely unless
manually changed. Deactivate the mute function by
performing the same action again.

3 Error Messages

In the unlikely event of your product developing a
fault, one of three error messages may appear. If
E002 appears, switch your controller off and on
again. This should rectify the problem. If this
message persists, return your product for repair.
If the error message E003 or E004 appears, your
controller has developed an internal fault and
should be returned for repair.

4 Music Function

If you want to personalise your
choose from the following range of paired tunes
by pressing the upper and lower halves of the
right intensity button until you find the paired
tunes you like (fig. c). The pairs of tunes are:
pair 01:
Beginning of session:
End of session:
SLENDERTONE
pair 02:
Beginning of session: Reidy's Opus
End of session: That's It!
SLENDERTONE ABS
Startup
SLENDERTONE
Shutdown
pair 03:
Beginning of session: William Tell Overture
End of session: Mexican Hat
pair 04:
Beginning of session: Jingle Bells
End of session: We Wish You A Merry Christmas
5 Rapid Intensity Increase
If you want to advance your intensity level quickly,
press the information button and the upper halves
of both intensity buttons (fig. d). This function is
only available on programmes 5-10.

CARING FOR YOUR BELT

You should never let your
get wet, but you may wipe it clean with a lightly
dampened cloth from time to time. The
belt can be washed, but you must first remove the
controller and gel pads. You must always follow the
instructions on the label when washing the belt.
Do not machine wash your belt. You should
always hand wash it in lukewarm water. This
protects the internal wiring from damage in
the washing machine. It is recommended
that you take care even when hand washing
and never wring the belt to remove water.
5,
Do not use any bleach when washing your
belt.
Do not dry clean your belt.
Do not tumble dry your belt. You should
always dry the belt on a flat surface. Do not
dry it over anything hot (e.g. a radiator) as
the belt contains plastic parts. You should
ensure the belt is completely dry before
use.
Do not iron your belt.
controller
SLENDERTONE
SLENDERTONE
7