Summary of Contents for Xenta X-Force 1H
- Page 1 Xenta X-Force 1H 5.1 Surround Sound Home Theatre Instruction Manual...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION Read these instructions carefully. Keep these instructions safe for later use. Unplug the speakers from the computer and from the electrical outlet before cleaning them with a dry cloth. Install in accordance with the manufacturer’s instructions. ... -
Page 3: Box Contents
BOX CONTENTS X5 Satellites X1 Subwoofer X3 RCA-Stereo Signal Line X1 Manual PLACING SPEAKERS SUBWOOFER All stereo-encoded information is heard through the satellite speakers. The subwoofer contains no stereo imaging, and its sound is non-directional. As a result, the subwoofer doesn’t have to be placed in any particular relationship to the satellites. - Page 4 CONNECTING WARNING: Do not insert the speaker systems plug in to an outlet until all connections are made. Also, turn off audio source before connecting the outputs to this systems inputs. To ensure first-time operation as expected, carefully follow the connection sequences described below in the order indicated for your particular application.
- Page 5 INPUTS Various connection schemes between your audio source and this system are available. Determine if you’ll be setting up the speaker system for PC audio/PC gaming, DVD playback, console gaming or with portable audio devices (such as MP3), then skip to the appropriate section. 1-CHANNEL / TV SET / VCD PLAYER Locate a signal cable with an RCA-RCA jack (not included) Insert the RCA jack with the AUX / CD / VCD input outlet on the subwoofer.
- Page 6 2-CHANNEL / STEREO SOUND CARDS Locate a signal cable with an STEREO-RCA jack. Insert the RCA jack with the input outlet on the subwoofer. Connect another end of the signal cable with the audio devices output. Select “AUX” input on the remote control when it’s powered on.
- Page 7 3-CHANNEL / 5.1 SOUND CARDS Locate the 3 pieces of signal cable with RCA-stereo jack. Insert the RCA jack with the AC/3 input outlet on the subwoofer. Connect another end of the signal cable with the audio devices output. Select “AC-3” input on the remote control when it’s powered on.
- Page 8 4-CHANNEL / 5.1 DVD PLAYERS Locate the 3 pieces of signal cable with RCA-RCA jack (not included). Insert the RCA jack with the AC/3 input outlet on the subwoofer. Connect another end of the signal cable with the audio devices output. Select “AC-3”...
- Page 9 POWERING ON After all other connections are made, plug the AC power cord (on the back of the subwoofer) in to a wall outlet. The speaker system is now ready to operate. Turn on the audio source. Turn on the speaker system by pushing the on/off button located on the back of the subwoofer.
-
Page 10: Using The System
USING THE SYSTEM Standby Reset AC-3 3D Mode Treble Down Treble Up 2.1 Ch. Output Middle Down 10. Middle Up 11. Simulated 5.1 Ch. Output 12. Bass – 13. Bass + 14. Sound Field Effort 1 15. Sound Field Effort 2 16. - Page 11 Adjustment of Sound Level: Press these buttons to get your satisfied sound level. Vol + / Vol – Cen + / Cen – Rear + / Rear – Sub + / Sub – Adjustment of Sound Tone: Press these buttons to get your satisfied sound level. Treble + / Treble –...
-
Page 12: Specifications
SPECIFICATIONS TOTAL RMS POWER SUBWOOFER 30W RMS into 4ohms at 100Hz at 10% THD (Total Harmonic Distortion) SATELLITES 50W RMS into 4ohms at 1kHz at 10% THD (Total Harmonic Distortion) TOTAL PEAK POWER 160W at < 10% THD SYSTEM THD Better than 0.05% THD before clipping SIGNAL TO NOISE RATIO >96dB...
Need help?
Do you have a question about the X-Force 1H and is the answer not in the manual?
Questions and answers