Device Application; Models 3202 And 3303 - Orthofix Physio-Stim Instruction Manual

Device Application

Models 3202 and 3303

Physio-Stim Models that are "U-shaped" are specifically designed for placement
on a limb (e.g., tibia, femur, radius). These models may be worn over clothing,
or over a cast or external fixation device if present.
To apply
1. Begin with the Physio-Stim unbuckled.
2. Place the Physio-Stim so that
it is centered over the treatment site.
It is suggested that the skin or cast
(if present) be marked to facilitate
placement of the device.
3. Bring the elastic strap around the limb
and fasten the clasp.
4. If strap adjustment is needed, remove
the device and tighten or loosen
the strap until it feels secure and
comfortable.
7