Keypad Start Button Colours; User Programming - Washtech M2 Operator's Manual

Keypad Start Button Colours

Machine State
Door Open
Filling
Heating
Ready
Ecopower
Washing
Error

User Programming

The User Settings menu is accessed by pressing the UP and DOWN keys
simultaneously for 5 seconds, the screen should then change to:
Press the POWER button to scroll between settings.
Press the UP and DOWN keys to change a specific setting,
Press the START button to return to the operator screen.
The programming options are specified in the table below:
User Settings
Power Save
Detergent Prime
Fill Detergent Injection Time
Wash Detergent Injection Time
Rinse Aid Injection Time
Display Contrast
Power Save function reduces the rinse temperature setting by 10°C when the machine is
idle for 5 minutes or more. The temperature settings return to the set value when door is
opened or START/STOP key is pressed.
QuickStart starts washing regardless of rinse temperature. If rinse temperature is not
sufficient cycle countdown will stop at 22 seconds. Washing continues until rinse reaches
temperature required for sanitization and countdown then resumes.
8 M2 - Operator Manual 151006
UP
POWER
DOWN
Colour
Purple
White
Orange
Green
Blue
Red
Flashing Red
START
Factory Setting
ON
OFF
40
15
12
27
Selection
ON/OFF
ON/OFF
0 - 180 secs
1 - 30
1 - 30
10 - 40