Dynamic Light; Incoming Call; Low Battery - Siemens M55 User Manual

38

Dynamic Light

KmK
§Menu§
K
Select function.
You can switch on the visual signals
(LEDs) on both sides of the phone for
the following functions. The LEDs
then flash in different rhythms de-
pending on the current function.
Play demo
All flash rhythms are displayed in se-
quence. End with §Cancel§.

Incoming call

You can assign different flash
rhythms to Calls,
d
each group.
During call
Incoming msgs
Alarm
CarKit conn.
Net search

Low battery

Switch on/off
Switch the flash rhythm on or off
that is to flash when the phone is
switched on/off.
m Setup
Dynamic Light
Other calls and
Net sync.
Switch the flash rhythm on or off
that is to flash when the phone and
network are synchronised.
Keys
K m K
§Menu§
K
Select function.
Any to answer
Incoming calls can be accepted by
pressing any key
B
(except for
Auto key lock
If activated, the keypad is locked au-
tomatically if no key has been
pressed for one minute in standby
mode. However, you can still be
called and you can still make an
emergency call.
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
Hold down
Key tones
See "Audio" above.
Keys
).
.