Advertisement
Assembly instructions - Free-standing model
Product dimensions
1
2
600
850
(All sizes are given in millimetres)
Once the appliance is positioned, adjust the feet (screwing
We reserve the right to make technical
modifications.
more than 2 .
4
Inlet pipe connection
5
Drain pipe connection
SINK
DISHWASHER
PO W ER
O U TL ET
Drain pipe connector
Inlet pipe
connector
FRONT VIEW
Min 100mm
Insert the drain hose into the drain pipe and fix properly with
a clamp. Make sure there is no bending on the drain pipe (You
may use the special plastic support that attached with the
appliance). The free end of the hose must be at a height
between 400 and 1000mm and must not be immersed in water.
6
Insert the plug
The plug must be plugged into an appropriate outlet that
is installed and grounded in accordance with all local
POW ER OUT LET
codes and ordinances.
3
Drain pipe
Inlet pipe
connector
connector
Turn
BACK VIEW
FRONT VIEW
NOTE :
Please refer to above picture,
if you want to install the
dishwasher at the right side
of the sink.
-14-
2. With a little force to ensure the door is properly closed.
Note: A click could be heard when the door is closed perfectly.
3. Insert the plug into the socket. The power supply is 220~240V/50Hz
2. Press the programme button to select the desired programme.
3. Press the
Start/Pause
1
Min 100mm
2
3
4
5
6
1
Upper Basket
2
Spray Arms
3
Lower Basket
4
Water Softener(Option)
The maximum number of place settings to be washed is 12.
button to start washing.
7
8
9
11
10
5
Main Filter
9
Coarse Filter
6
Detergent Dispenser
10
Rinse Aid Dispenser
7
Cup Shelf
11
Drain pipe connector
8
Silverware Basket
12
Inlet pipe connector
-3-
12
Advertisement
