Sony XR-M500R Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Car Receiver
  5. XR-M500R
  6. Service manual
Sony XR-M500R Service Manual

Sony XR-M500R Service Manual

Fm/am (mw/lw) cassette car stereo
Hide thumbs Also See for XR-M500R:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol ; are trademarks
of Dolby Laboratories Licencing Corporation.
AUDIO POWER SPECIFICATIONS (US model)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
19 watts per channel minimum continuous average power into
4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more
than 1% total harmonic distortion.
Other specifications
Cassette player section
Tape track
Wow and flutter
Frequency response
Signal-to-noise ratio
Cassette type
TYPE II,
IV
TYPE I
Tuner section
FM
Tuning range
Antenna terminal
Intermediate frequency
Usable sensitivity
Selectivity
XR-M500R/M550
Photo: XR-M550
SPECIFICATIONS
4-track 2-channel stereo
0.08 % (WRMS)
30 – 20,000 Hz
Dolby B NR
Dolby NR off
67 dB
61 dB
64 dB
58 dB
87.5 – 108.0 MHz (XR-M500R)
87.5 – 107.9 MHz (XR-M550)
External antenna connector
10.7 MHz/450kHz
8 dBf
75 dB at 400 kHz
FM/AM (MW/LW) CASSETTE CAR STEREO
Canadian Model
Model Name Using Similar Mechanism
Tape Transport Mechanism Type
Signal-to-noise ratio
66 dB (stereo),
72 dB (mono)
Harmonic distortion at 1 kHz
0.6 % (stereo),
0.3 % (mono)
Separation
35 dB at 1 kHz
Frequency response
30 – 15,000 Hz
MW/LW (XR-M500R)
Tuning range
MW: 531 – 1,602 kHz
LW: 153 – 279 kHz
Aerial terminal
External aerial connector
Intermediate frequency
10.7 MHz/450 kHz
MW: 30 µV
Sensitivity
LW: 40 µV
AM (XR-M550)
Tuning range
530 – 1,710 kHz
Antenna terminal
External antenna connector
Intermediate frequency
10.7 MHz/450 kHz
30 µV
Sensitivity
US Model
XR-M550
AEP Model
UK Model
XR-M500R
NEW
MG-25E-136
– Continued on next page –

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XR-M500R and is the answer not in the manual?

Questions and answers

Related Manuals for Sony XR-M500R

Summary of Contents for Sony XR-M500R

  • Page 1 Tuner section Intermediate frequency 10.7 MHz/450 kHz MW: 30 µV Sensitivity LW: 40 µV Tuning range 87.5 – 108.0 MHz (XR-M500R) 87.5 – 107.9 MHz (XR-M550) AM (XR-M550) Antenna terminal External antenna connector Tuning range 530 – 1,710 kHz Intermediate frequency 10.7 MHz/450kHz...

  • Page 2: Table Of Contents

    Speaker impedance 4 – 8 ohms Maximum power output 50 W × 4 (at 4 ohms) GENERAL General Location of Controls (XR-M500R) ........ 4 Outputs Audio output (2) (M500R) Setting the Clock ............. 4 Audio output (3) (M550) Changing the Sound and Display Setting ....... 4...

  • Page 3: Servicing Notes

    There are four types of main board in according of destination for The front panel opens to the bottom of main unit. XR-M500R. In performing the repair, place the main unit on the base having the height exceeding 1 cm.

  • Page 4: Location Of Controls (Xr-M500R)

    SECTION 2 This section is extracted from instruction manual. GENERAL (XR-M500R) Location of controls Security side The corresponding buttons of the unit qk TA button 16, 17, 18 control the same functions as those on ql SOUND button the card remote commander.

  • Page 5: Locations Of Controls (Xr-M550)

    (XR-M550)

  • Page 6: Installation (Xr-M500R)

    Säkerhetsföreskrifter Precauções •If you mount other Sony equipment with this •Si monta otro equipo Sony con esta unidad, es •Om du monterar annan Sony-utrustning till •É preferível montar este aparelho na posição unit, it is better to mount this unit in the lower preferible montar esta unidad en la posición más...
  • Page 7 (XR-M550)

  • Page 8: Connections (Xr-M500R)

    (XR-M500R) Connections Conexiones Anslutning Ligações Cautions Precauciones Säkerhetsföreskrifter Cuidado •This unit is designed for negative earth 12 V DC •Esta unidad ha sido diseñada para alimentarse •Denna bilstereo är endast avsedd för anslutning •Este aparelho foi concebido para funcionar operation only.

  • Page 9: Connection Example

    If the supplied power connecting cord can not Felaktig anslutning kan skada bilen. Kontakta be used with your car, consult your nearest Sony närmaste Sony-återförsäljare om den medföljande dealer. strömkabeln inte passar till din bil.
  • Page 10 Power connection diagram Diagrama de conexión de Strömanslutningsschema Diagrama de ligação de corrente alimentación Auxiliary power connector may vary depending Typen av yttre strömanslutning varierar från bil O conector auxiliar de corrente pode variar de on the car. Check your car’s auxiliary power till bil.

  • Page 11: Connection Diagram

    Connection diagram Diagrama de conexiones Kopplingsschema Diagrama de ligações Equipment used in illustrations Equipo utilizado en las ilustraciones Utrustning som visas i illustrationer Equipamento utilizado nas ilustrações (not supplied) (no suministrado) (medföljer inte) (não fornecido) Front speaker Rear speaker Power amplifier CD/MD changer Altavoz delantero Altavoz trasero...

  • Page 12: Connections (Xr-M550)

    (XR-M550)

  • Page 15: Disassembly

    SECTION 3 DISASSEMBLY • See page 3 for Servicing Notes. Note: Follow the disassembly procedure in the numerical order given. MECHANISM DECK (MG-25E-136) 1 screw flexible board Note: Don't pull out flexible board from front panel ass’y. 1 screw 2 front panel ass'y 4 two screws 5 mechanism deck (MG-25E-136)
  • Page 16 FRONT PANEL ASS’Y 1 cover (flexible) 2 flexible board (CN402) • Note for Installation of Flexible Board 2 flexible cover 1 Set the flexible board to be at the position in the figure. 3 front panel ass'y MOTOR BLOCK ASS’Y, CAM (R) ASS’Y 4 screw 2 screw 4 screw...
  • Page 17 SUB PANEL (XR) SUB ASS’Y 1 flexible board 2 screw (CN601) (PTT2.6 × 6) 3 sub panel (XR) sub ass'y 2 screw 2 two screws (PTT2.6 × 6) (PTT2.6 × 6) MAIN BOARD 1 two screws (PTT2.6 × 6) 1 screw (PTT2.6 ×...
  • Page 18 HEAT SINK 2 cord (with connector) (ANT) 5 cord (with connector) (SUB OUT) 6 two screws (PTT2.6 × 12) 6 three screws (PTT2.6 × 8) 1 connector (CN100) 4 screw (PTT2.6 × 6) 3 connector (CN200) 6 two screws (PTT2.6 × 8) 7 heat sink...

  • Page 19: Assembly

    SECTION 4 ASSEMBLY Note: Follow the assembly procedure in the numerical order given. 4-1. FRONT PANEL MACHINERY MOTOR BLOCK ASS’Y 2 stop ring 1 cam (L) 7 bracket (motor) ass'y hole 6 washer (M) switch 5 gear (C) 4 gear (B) 6 washer (M) Set bracket (motor) ass’y to be at the position in the...
  • Page 20 CAM (R) ASS’Y, MOTOR BLOCK ASS’Y 1 Supply the power to the motor. gray wiring – Voltage : 9V Violet wiring : MOTOR – Gray wiring : MOTOR + 2 Motor stops at full open position. violet wiring full open position 4 screw (PTT2.6 ×...
  • Page 21 4-2. MECHANISM DECK HOUSING 7 Holder the hanger by bending the claw. 5 Fit projection on C part. 1 Install the catch to the hanger. 2 Install the hanger onto two claws of the housing. hanger 4 Fit claw on B part. 3 Put the housing 6 Fit projection on D part.
  • Page 22 LEVER (LDG-A) / (LDG-B) shaft A shaft A shaft B shaft B shaft C 1 Fit the lever (LDG-A) on 3 type-E stop ring 2.0 shafts A – C and install it. 2 Fit the lever (LDG-B) on shafts A and B and install it.
  • Page 23 GUIDE (C) 2 guide (C) 1 three claws MOUNTING POSITION OF CAPSTAN/REEL MOTOR (M901) two precision screws (P2 × 2) capstan/reel motor (M901) 30˚...

  • Page 24: Mechanical Adjustments

    SECTION 5 SECTION 6 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS 1. Clean the following parts with a denatured-alcohol-moistened TEST MODE swab: playback head pinch roller <Set the Test Mode> rubber belt capstan 1. Turn ON the regulated power supply. (All LEDs on the set idler lights up, and the clock is displayed.) [OFF]...

  • Page 25: Tuner Section

    Dolby Level Adjustment Adjustment Location: Setting: – SET UPPER VIEW – [SOURCE] button : ON [MENU] Preset (PLAY MODE) and [DISC ] – buttons : NR off [SOUND] (BAS) button : Center [SOUND] (TRE) button : Center [SOUND] (BAL) button : Center TUX100 [SOUND] (FAD) button...
  • Page 26 MEMO...

  • Page 27: Diagrams

    XR-M500R/M550 SECTION 7 DIAGRAMS 7-1. BLOCK DIAGRAM – TUNER/TAPE Section – BACKUP +5V D101 TUNER VCC TUNER +5V FM/AM TUNER UNIT TUX100 (FM/AM ANTENNA) (Page 28) 2 FM-ANT AM-ANT MUTING Q101 AM-DET (Page 28) 12 13 MUTING Q102 MUTING CONTROL...

  • Page 28: Block Diagram - Main Section

    XR-M500R/M550 • SIGNAL PATH : FM 7-2. BLOCK DIAGRAM – MAIN Section – : AM (MW/LW) : TAPE PLAY : BUS AUDIO IN CN300 (1/2) INPUT SELECT, FM MPX, AUDIO IN SPEANA (Page 29) ELECTRICAL VOLUME IC100 (XR-M500R) OUTSSL CN300 (2/2)

  • Page 29: Block Diagram -Display/Bus Control Section

    BUS-ON XTAL LCD-SW1 85 BUS-ON (Page 30) BU IN BU-IN D628 D611 SCHMITT TRIGGER BATT B+ IC606 C911, R982 TH601 SONY BUS INTERFACE IC501 BATT RESET RESET RESET SWITCH 12 13 DATA RESET SIGNAL BACK UP +5V GENERATOR RESET UNISO...

  • Page 30: Block Diagram - Power Supply Section

    BATT B+ FRONT PANEL TUNER +5V OPEN/CLOSE DETECT TUNER CIRCUIT/ +5V REGULATOR B+ SWITCH +9V REGULATOR CLOSE RDS DECODER (IC701) Q100 Q103, 104 IC605 B+ (XR-M500R) OPEN TH301 D308 ANTENNA REMOTE SWITCH ANT-R Q300, 301 TU-ON FLS-PWON 82 TH300 D309 D609...

  • Page 31: Note For Printed Wiring Boards And Schematic Diagrams

    XR-M500R/M550 7-5. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS • Waveforms – MAIN Board – – DISPLAY Board – Note on Printed Wiring Board: Note on Schematic Diagram: 1 IC701 5 OSCI 1 IC901 y; OSC • X : parts extracted from the component side.

  • Page 32: Main Board (Component Side)

    XR-M500R/M550 7-6. PRINTED WIRING BOARD – MAIN Board (Component Side) – • Semiconductor Location Ref. No. Location Ref. No. Location IC502 D100 D-13 D101 C-13 IC503 D102 IC601 IC602 D103 D104 D-13 IC603 D200 IC606 IC607 D201 D202 IC700 J-12...

  • Page 33: Printed Wiring Board - Main Board (Conductor Side)

    XR-M500R/M550 7-7. PRINTED WIRING BOARD – MAIN Board (Conductor Side) – (M500R) RL– GRN/BLK FL– WHT/BLK FR– GRY/BLK RR– VIO/BLK CN301 WHT/BLK GRN/BLK VIO/BLK GRY/BLK LIGHT BLU BLU/WHT AMP REM ORG/WHT ORG/WHT BATT ANT REM (M550) WHT/BLK FRONT LCH (–)

  • Page 34: Schematic Diagram – Main Board (1/4)

    XR-M500R/M550 7-8. SCHEMATIC DIAGRAM – MAIN Board (1/4) – • See page 31 for Waveforms. • See page 42 for IC Block Diagrams. (Page (Page 37) (Page 36)

  • Page 35: Schematic Diagram – Main Board (2/4)

    7-9. SCHEMATIC DIAGRAM – MAIN Board (2/4) – • See page 42 for IC Block Diagrams. XR-M500R/M550 (Page 34) (Page 36) (Page 37)

  • Page 36: Schematic Diagram - Main Board (1/4)

    XR-M500R/M550 7-10. SCHEMATIC DIAGRAM – MAIN Board (3/4) – • See page 31 for Waveforms. • See page 42 for IC Block Diagrams. (Page 34) (Page 35) (Page...

  • Page 37: Schematic Diagram - Main Board (2/4)

    XR-M500R/M550 7-11. SCHEMATIC DIAGRAM – MAIN Board (4/4) – • See page 31 for Waveforms. (Page 35) (Page 34) (Page 41) (Page (Page 39)

  • Page 38: Printed Wiring Board -Sub Board

    XR-M500R/M550 7-12. PRINTED WIRING BOARD – SUB Board – • Semiconductor Location Ref. No. Location D900 D901 D902 D903 D904 D905 A-10 IC900 A-11 • Semiconductor Location Ref. No. Location D907 D908 A-10 Q900 B-12 Q901 A-12 (Page 33) FOR TEST...

  • Page 39: Schematic Diagram - Sub Board

    XR-M500R/M550 7-13. SCHEMATIC DIAGRAM – SUB Board – (Page 37)

  • Page 40: Printed Wiring Board - Display Board

    XR-M500R/M550 7-14. PRINTED WIRING BOARD – DISPLAY Board – • Semiconductor Location Ref. No. Location LED901 LED903 LED904 LED907 LED908 LED911 B-13 LED912 B-13 LED913 LED914 C-13 LED915 B-13 LED916 A-13 IC901 IC902 IC903 Q901 Q902 (Page 32) • Semiconductor Location Ref.

  • Page 41: Schematic Diagram - Display Board

    XR-M500R/M550 7-15. SCHEMATIC DIAGRAM – DISPLAY Board – • See page 31 for Waveforms. (Page...
  • Page 42 • IC Block Diagrams – MAIN Board – IC100 TDA7402TR IC102 BA3834F 33 32 31 24 23 MULTIPLEXER DECODER MIXER MONO- MONO- MONO- MONO- MONO- MONO- FADER FADER FADER FADER FADER FADER ACINLF FRONT SUBWOOFER SWINR ACIN +PHASE OUTPUT SWINL REGISTER REGISTER REGISTER...
  • Page 43 PBGND MS ON/ DETECT – MSOUT PBFIN2 PBREF2 DGND PBRIN2 PBFB2 MSTC OFF/B 120µ/ 70µ 8 9 10 IC700 SAA6588T/V2-118 (XR-M500R) IC502 BA6288FS-E2 OUT1 OUT2 POWER SUPPLY PAUSE DRIVER & RESET DETECTOR MULTI PATH 57kHz DRIVER DETECTOR 8th ORDER BAND-PASS FILTER...

  • Page 44: Ic Pin Function Description

    (IC607) MUTE Audio line muting on/off control signal output terminal “H”: muting on System reset signal output to the liquid crystal display drive controller (IC607) and SONY bus SYSRST interface (IC501) “L”: reset Forward/reverse direction control signal output to the CXA2510AQ (IC401) N-ROUT “L”: forward direction, “H”: reverse direction...
  • Page 45 (LSW901 TA, LSW903 D-BASS: XR-M500R only) Key input terminal (A/D input) (LSW913 to LSW919, LSW921 to LSW925, S902) 6 to 3, SHUF 2, REP 1, AF, +, PTY DSPL (XR-M500R), DSPL (XR-M550), –, OFF, SOURCE, KEYIN1 MODE o keys input...
  • Page 46 101 to 103 Setting terminal for security code SCODE3 DSTSEL1, 104, 105 Destination setting terminal (A/D input) XR-M500R: fixed at “L”, XR-M550: fixed at “H” DSTSEL2 BOOT Serial data output to the liquid crystal display drive controller (IC607) DSP GAIN...
  • Page 47 Pin No. Pin Name Description Tuner system power supply on/off control signal output terminal TUNON “H”: tuner power on LED SW1, Security/operation side select control signal output to the liquid crystal display drive controller 115, 116 LED SW2 (IC607) 117, 118 Not used (open) —...
  • Page 48 Battery detect signal input from the SONY bus interface (IC501) and battery detect circuit BU-IN “L” is input at low voltage LINK-OFF Link on/off control signal output for the SONY bus “L”: link on, “H”: link off Not used (open) ILL-ON Power on/off control signal output of the illumination LED “H”: power on...
  • Page 49 — Power supply terminal (+5V) 90 to 96 PF6 to PF0 Not used (open) UNI-SO Serial data output to the SONY bus interface (IC501) UNI-SI Serial data input from the SONY bus interface (IC501) 99, 100 — Ground terminal UNICKI...
  • Page 50 Pin No. Pin Name Description P46/AN6/DA0 Not used (fixed at “L”) P47/AN7/DA1 Not used (fixed at “L”) AVSS — Ground terminal (for A/D converter) — Ground terminal 115 to 122 P17 to P10 Not used (open) Setting terminal for the CPU operational mode (fixed at “H”) Setting terminal for the CPU operational mode (fixed at “H”) Setting terminal for the CPU operational mode (fixed at “H”) 126 to 128...

  • Page 51: Exploded Views

    SECTION 8 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they • Please refer to servicing notes (page 3) for may have some difference from the original are seldom required for routine service. Some system of TYPE A, B, C and D.
  • Page 52 (2) FRONT PANEL SECTION LCD902 LCD901 M500R Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3378-768-1 PANEL (MAIN) ASSY, FRONT 3-045-739-01 BUTTON (SEEK) (M550) 3-045-781-01 BUTTON (RESET) (MAIN) (DISC +,> M, - DISC, .) 3-045-702-01 BRACKET (LCD) (MAIN) 3-045-734-01 CUSHION (SEEK) 1-694-685-11 CONDUCTIVE BOARD, CONNECTION 3-044-469-11 PANEL (SUB), FRONT (M500R)
  • Page 53 (3) MAIN BOARD SECTION M601 M550 TUX100 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 101 X-3378-559-1 CHASSIS (XR) ASSY * 118 3-044-471-01 HEAT SINK (M550) A-3315-066-A SHAFT ASSY, DRIVE * 118 3-044-471-11 HEAT SINK (M500R) 3-045-722-01 CAM (L) * 119 3-047-525-01 PLATE (BUS, BAR), GROUND...
  • Page 54 (4) MECHANISM DECK SECTION (MG-25E-136) HP901 M901 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3291-667-A CLUTCH (FR) ASSY 3-933-346-01 CATCHER * 152 3-019-130-01 LEVER (LDG-A) 3-933-344-01 GUIDE (C) 3-019-131-01 LEVER (LDG-B) 3-014-798-01 SCREW (HEAD), SPECIAL 3-020-539-01 SPRING (LD-1), TENSION 3-364-151-01 WASHER 3-020-540-01 SPRING (LD-2), TENSION...

  • Page 55: Electrical Parts List

    SECTION 9 DISPLAY ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they When indicating parts by reference number, please include the board. are seldom required for routine service. parts list may be different from the parts speci- fied in the diagrams or the components used Some delay should be anticipated when order- on the set.
  • Page 56 DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark LSW912 1-771-476-11 SWITCH, KEY BOARD (WITH LED) (OPEN) LSW913 1-771-883-11 SWITCH, TACTILE (WITH LED) (6) R932 1-216-035-00 METAL CHIP 1/10W LSW914 1-771-883-11 SWITCH, TACTILE (WITH LED) (5) R933 1-216-025-00 RES-CHIP 1/10W...
  • Page 57 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3294-887-A MAIN BOARD, COMPLETE (M550) C139 1-164-346-11 CERAMIC CHIP A-3294-889-A MAIN BOARD, COMPLETE (M500R: TYPE C) C140 1-163-235-11 CERAMIC CHIP 22PF A-3294-890-A MAIN BOARD, COMPLETE (M500R: TYPE A) C141 1-164-505-11 CERAMIC CHIP 2.2uF...
  • Page 58 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C252 1-125-972-61 ELECT 100uF C419 1-107-823-11 CERAMIC CHIP 0.47uF (M550) C420 1-107-823-11 CERAMIC CHIP 0.47uF C253 1-125-972-61 ELECT 100uF C421 1-163-113-00 CERAMIC CHIP 68PF (M550) C422 1-164-004-11 CERAMIC CHIP 0.1uF C254 1-126-157-11 ELECT...
  • Page 59 8-719-801-78 DIODE 1SS184 (M500R) D300 8-719-074-47 DIODE CRS02 (TE85L) (M550) C705 1-163-038-00 CERAMIC CHIP 0.1uF D300 8-719-079-97 DIODE CRZ22 (TE85L. SONY) (M500R) (M500R) D301 8-719-074-47 DIODE CRS02 (TE85L) (M550) C707 1-163-237-11 CERAMIC CHIP 27PF D301 8-719-079-97 DIODE CRZ22 (TE85L. SONY) (M500R)
  • Page 60 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D515 8-719-073-01 DIODE MA111-TX IC700 8-759-650-68 IC SAA6588T/V2-118 (M500R) D516 8-719-073-01 DIODE MA111-TX IC750 8-759-385-17 IC NJM4580E (TE2) (M500R) D601 8-719-073-01 DIODE MA111-TX < JACK > D602 8-719-067-56 DIODE MA112-TX D603 8-719-073-01 DIODE MA111-TX...
  • Page 61 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > R220 1-216-837-11 METAL CHIP 1/16W (M550) R100 1-216-049-11 RES-CHIP 1/10W R220 1-216-841-11 METAL CHIP 1/16W R101 1-216-057-00 METAL CHIP 2.2K 1/10W (M500R) R102 1-216-025-00 RES-CHIP 1/10W R221 1-216-805-11 METAL CHIP...
  • Page 62 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R312 1-216-214-00 RES-CHIP 4.7K 1/8W R600 1-216-081-00 RES-CHIP 1/10W R313 1-216-206-00 RES-CHIP 2.2K 1/8W R601 1-216-295-00 SHORT 0 (M550) R314 1-216-089-00 RES-CHIP 1/10W R316 1-216-295-00 SHORT R602 1-216-025-00 RES-CHIP 1/10W R317...
  • Page 63 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R664 1-216-097-00 RES-CHIP 100K 1/10W R756 1-216-061-00 METAL CHIP 3.3K 1/10W (M500R) R665 1-216-097-00 RES-CHIP 100K 1/10W R757 1-216-097-00 RES-CHIP 100K 1/10W R666 1-218-716-11 METAL CHIP 0.5% 1/16W (M500R) R667...
  • Page 64 SWITCH Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TRANSISTOR > 3-047-781-11 MANUAL, INSTRUCTION (ENGLISH, FRENCH, SPANISH) (M550) Q900 8-729-207-56 TRANSISTOR RN1402-TE85L 3-047-783-11 MANUAL, INSTRUCTION Q901 8-729-207-68 TRANSISTOR RN2402-TE85L (ENGLISH, SPANISH, SWEDISH, PORTUGUESE) (M500R: AEP, UK) <...
  • Page 65 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark XR-M500R PARTS FOR INSTALLATION AND CONNECTION ************************************* 1-465-459-21 ADAPTER, ANTENNA (M500R) 1-776-527-71 CORD (WITH CONNECTOR) (ISO) (POWER) (M500R) ANTENNA ADAPTER POWER CORD 1-792-194-11 CORD (WITH CONNECTOR) (POWER) (M550) ×...
  • Page 66 XR-M500R/M550 Sony Corporation 9-870-088-11 2000C0557-1 Mobile Electronics Division Company Printed in Japan C 2000. 3 Published by General Engineering Dept.

This manual is also suitable for:

Xr-m550

Table of Contents

Save PDF