●
If the cover fails to open completely, the appliance will not operate
because of the safety device.
3
3
Remove the water supply
tank by pushing it.
●
When pushing the water supply
tank, it will rise slightly.
4
4
After opening the water supply cap, fill the water
supply tank with water up to the full mark.
●
The arrow indicates full mark level.
●
If the water level is below the full mark, the steam may
release inconsistently, or the mist may not release.
●
Wipe off any water from the surface of the water supply
tank.
●
Use only distilled water or purified water.
(Distilled water is recommended.)
●
Do not use ice water.
●
Do not use hot water because it may deform the water
supply tank.
5
5
Install the water supply tank by pushing it into the
appliance until it clicks.
●
Once the water supply tank is installed, the water is supplied into
the appliance and the water level in the water supply tank becomes
lower.
●
Repeated installation and removal of the water supply tank may
cause water to leak from the drain outlet.
6
6
Firmly insert the nozzle cap into the nozzle with the
housing hook hole on the top side.
20