Do you have a question about the TS 138 and is the answer not in the manual?
Questions and answers
Dale
January 20, 2025
My mower engine stops when engage the cutting deck
1 comments:
Mr. Anderson
February 4, 2025
The engine of the Husqvarna TS 138 mower may stop when engaging the cutting deck due to the following possible issues:
1. Build-up of grass, leaves, or trash under the mower: Clean the underside of the mower housing. 2. Dirty air filter: Clean or replace the air filter. 3. Low oil level or dirty oil: Check the oil level and change the oil if necessary. 4. Faulty spark plug: Clean, regap, or replace the spark plug. 5. Dirty fuel filter: Replace the fuel filter. 6. Stale or dirty fuel: Empty the fuel tank and refill it with fresh, clean fuel. 7. Water in the fuel: Empty the fuel tank and carburetor, then refill the tank with fresh gasoline and replace the fuel filter. 8. Loose or damaged wiring: Check and fix all wiring connections. 9. Engine valves out of adjustment: Contact an authorized service center for adjustment.
These issues can cause the engine to lose power or stop when the cutting deck is engaged.
This answer is automatically generated
Colin Charles Hindmarch
February 26, 2025
how many grease **** are 0on the T380 ride on mower
Need help?
Do you have a question about the TS 138 and is the answer not in the manual?
Questions and answers
My mower engine stops when engage the cutting deck
The engine of the Husqvarna TS 138 mower may stop when engaging the cutting deck due to the following possible issues:
1. Build-up of grass, leaves, or trash under the mower: Clean the underside of the mower housing.
2. Dirty air filter: Clean or replace the air filter.
3. Low oil level or dirty oil: Check the oil level and change the oil if necessary.
4. Faulty spark plug: Clean, regap, or replace the spark plug.
5. Dirty fuel filter: Replace the fuel filter.
6. Stale or dirty fuel: Empty the fuel tank and refill it with fresh, clean fuel.
7. Water in the fuel: Empty the fuel tank and carburetor, then refill the tank with fresh gasoline and replace the fuel filter.
8. Loose or damaged wiring: Check and fix all wiring connections.
9. Engine valves out of adjustment: Contact an authorized service center for adjustment.
These issues can cause the engine to lose power or stop when the cutting deck is engaged.
This answer is automatically generated
how many grease **** are 0on the T380 ride on mower