Ta Function (Traffic Announcement); Ta Settings; Af Function (Alternative Frequency) - Xomax XM-VRSU411 User Manual

Topic: Radio mode
TA function
(Traffic Announcement)
While this function is activated the unit
switches automatically to the radio
mode for the current traffic announ-
cement. After the announcement it
switches back to the initial mode.

TA settings

If you are leaving the TA zone or the
signal goes poor you can set the unit as
follows:
: the searching for the stron-
TA SEEK
gest TA signal starts automatically.
: the alarming sound appears.
TA ALARM
AF function
(Alternative Frequency)
The AF function switches automatically
to alternative radio station as soon
as you leave the receiving area of the
current station.
To active/deactivate the „
press the button (perhaps you
2 SEL
will have to hold it pressed for a ca. 2
sec.) several times till the prompt "
appears on the display. Now use
ON"
the / buttons to turn the
VOL- VOL+
function on or off.
i
We recommend you to deactivate
this function in-city. Otherwise the
searching starts each time you drive
through the tunnel.
XOMAX
" function
AF
AF
22
DE
X M - V R S U 4 1 1