Panasonic HX-A1M Basic Operating Instructions Manual page 25

Attaching this unit to the Tripod Mount
1
While holding D, loosen the adjustment belt B
until this unit can be passed through it by rotating
the tightening nut C towards UNLOCK.
2
Pass this unit through the adjustment belt B so
that this unit is in the position shown in the figure.
3
While holding D, tighten the adjustment belt B by
rotating the tightening nut C towards LOCK until
this unit is fastened securely.
≥ Adjust the adjustment belt with hands. Do not apply too much
force.
≥ Do not rotate the tightening nut more than necessary after
fastening this unit.
≥ Check the direction of this unit after attaching it.
≥ To correct the left/right tilt of this unit, loosen the adjustment
belt.
Removing this unit from the Tripod Mount
While holding D, loosen the tightening nut C by
rotating it towards UNLOCK, and remove this unit.
≥ This unit is not waterproof when the terminal cover (USB connection) is in use. In this case, do
not use this unit underwater or touch it with wet hands.

UNLOCK LOCK



UNLOCK LOCK

UNLOCK LOCK
(ENG) SQT0886




25