Related Manuals for Armani Exchange DATE
Summary of Contents for Armani Exchange DATE
- Page 1 ENGLISH ANALOG INSTRUCTIONS Time Setting 1. Pull crown out to position 2. 2. Turn crown to set hour and minute hands to desired time. 3. Return crown to position 1.
-
Page 2: Date Models
3. Set to the correct time. Do not change the date between the hours of 10pm and 2am. This is the time when the movement is in position to carry out the automatic date change, and any interference may cause damage to the movement. - Page 3 2 EYE DAY/DATE MULTI-FUNCTION VX36 DATE 1 2 3 Date Setting 1. Pull crown out to position 2. 2. Turn clockwise to advance date hand. 3. Push crown back to position 1. Date and Time Setting 1. Pull crown out to position 3. 2. Turn clockwise to advance hour and minute hands. The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have reached the desired day.
- Page 4 MULTIFUNCTION 6P23 DATE 1 2 3 24-HOUR HAND Time Setting 1. Pull crown out to position 3. 2. Turn clockwise to advance hour and minute hands. 24-hour hand will move with hour and minute hands. Keep turning to reach desired time. 3. Return crown to position 1. Date Setting 1. Pull crown out to position 2. 2. Turn crown counter-clockwise to set date. 3. Return crown to position 1.
- Page 5 THREE EYE MULTI-FUNCTION 6P29/6P79 1 2 3 DATE 24-HOUR Date Setting 1. Pull crown out to position 2. 2. Turn clockwise to advance the date hand. 3. Push crown back to position 1. Day and Time Setting 1. Pull crown out to position 3. 2. Turn clockwise to advance hour and minute hands. The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have reached the desired day.
- Page 6 4. Return crown to position 1. NOTE: When crown is in position 2, do not press the pushers. Otherwise the chronograph hands will move. NOTE: To ensure accuracy, do not set the date between 9:00 p.m. and 1:00 a.m. Chronograph Functions Basic Function 1. Press A to start/stop the chronograph.
- Page 7 Interval Timing 1. Press B while the chronograph is running. 2. Press B again to return to the chronograph. 3. Press A to finalize timing. 4. Press B to reset. Adjusting the Chronograph Hands to Zero Position If one or more chronograph hands are not in their correct zero (12:00) positions after pressing B (for example, following a battery change): 1. Pull crown out to position 3. 2. Press A to move the chronograph 1/10 second counter one increment; press and hold A for fast advance. 3. Press B to reset the second and minute counters one increment; press and hold B for fast advance. 4. Return crown to position 1.
- Page 8 CHRONOGRAPH STOPwATCH JS25/VD54 (with date-VD53) 24-HOUR HAND MINUTE HAND 1 2 3 SECOND HAND Time and Date Setting 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 2. 3. Turn crown clockwise until the previous day’s date is displayed. 4. Pull crown out to position 3 when the second hand is at the 12:00 position. 5. Turn crown to set time. NOTE: 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to check that the 24-hour hand is set properly.
- Page 9 Chronograph Zero Reset 1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3. 2. Press A to move hands clockwise; press B to move hands counter-clockwise. 3. Return crown to position 1.
- Page 10 DIGITAL LED – BJ-3470 Normal Time Display 1. Press B to display time; press B again to change display mode. Mode sequence is time, date and seconds. 2. LED automatically turns off after 5 seconds. Time / Calendar Setting 1. In time display mode, press and hold A for 2 seconds to enter setting mode. 12/24- hour format will begin flashing. 2. Press B to choose 12 or 24-hour format. For 12-hour setting, “P” will be displayed for afternoon/evening hours. For 24-hour setting, no symbol will be displayed. 3. Press A to advance to hour. 4. Press B to increase digits; press and hold B for fast advance. 5. Press A to advance to next setting value. 6. Setting sequence is: 12/24-hour format, hour, minutes, seconds, year, month, date, and exit setting mode. NOTE: In setting mode, if no pusher is operated for 5 seconds, all changes will be...
- Page 11 PIN LINK DIAGRAM PIN PUSHER CHAIN NOSE PLIERS BRACELET HOLDER ARROWS Link Removal To remove a link from a pin link bracelet, you will need the bracelet holder, pin pusher, and chain nose pliers (see pin link diagram). 1. Open the clasp on the bracelet. 2. Look on the inside of the bracelet and locate the arrows near the clasp (see diagram). 3. Place the band into the appropriate size slot of the bracelet holder with the arrows pointing down (see diagram). 4. Center the desired pin to be removed over one of the holes in the bottom of the bracelet holder. 5. With the pin pusher, push the pin, as far as possible, through the link. 6. Remove the watch from the bracelet holder and simply finish pulling out the pin with the chain nose pliers. NOTE: Two pins hold each link in place and must be taken out before a link can be removed. Please note that the pins are partially split down the center.
- Page 12 USE PRECAUTIONS - RESISTANCE TO wATER water Resistance water-related Use Caseback Depth Marking Washing Shower, Swimming, Scuba Hands Bathing Snorkeling Diving — — — 3 Bar, 3 ATM 30 Meters 5 Bar, 5 ATM 50 Meters 10 Bar, 10 ATM 100 Meters 20 Bar, 20 ATM 200 Meters 30 Bar, 30 ATM 300 Meters 50 Bar, 50 ATM 500 Meters Always set the crown in closed position (the normal position).
Need help?
Do you have a question about the DATE and is the answer not in the manual?
Questions and answers