Table of Contents
Advertisement
®
VISIONPRO
8000 WITH REDLINK™
Humidity Display
If you are sensing Humidity from one location (internal or remote), the humidity reading displayed on the home screen is from the
sensor that is being used for control. In Fig. 309, the humidity reading is from the remote indoor sensor.
If you are sensing Humidity from two separate locations (one for humidification and another for dehumidification), you can select
which humidity reading to display on the home screen. In Fig. 310, the humidity reading is from the Main Level remote indoor
sensor based on the setting in ISU.
68-0312—03
Fig. 309.
Fig. 310.
114
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TH8320R1003 and is the answer not in the manual?
Questions and answers
I have a 2 zone system. When both are calling for heat the heat pump eventually locks up and shuts down.Therms. are new TH8320R1003