Enable/Disable Code 39 Full Ascii; Code 39 Buffering (Scan & Store) - Motorola Symbol LS9208 Product Reference Manual

Enable/Disable Code 39 Full ASCII

Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable
or disable Code 39 Full ASCII, scan the appropriate bar code below.
Code 39 Full ASCII to Full ASCII Correlation is host-dependent. See the ASCII Character Set table in the
appropriate host chapter.
NOTE Do not enable Trioptic Code 39 and Code 39 Full ASCII simultaneously.
Code 39 Buffering (Scan & Store)
This feature allows the scanner to accumulate data from multiple Code 39 symbols.
Select the Scan and Store option (Buffer Code 39) to temporarily buffer all Code 39 symbols with a leading space
as a first character for later transmission. The leading space is not buffered.
Decoding a valid Code 39 symbol with no leading space transmits in sequence all buffered data in a first-in first-out
format, plus the "triggering" symbol. See the following pages for further details.
Select Do Not Buffer Code 39 to transmit all decoded Code 39 symbols immediately without storing them in the
buffer.
This feature affects Code 39 only. If you select Buffer Code 39, Motorola recommends configuring the scanner to
decode Code 39 symbology only.
Enable Code 39 Full ASCII
*
Disable Code 39 Full ASCII
Buffer Code 39
(Enable)
Symbologies 11 - 31