Crank Rod Assembly Attachment - Brother PR600II Service Manual

Main unit
4

Crank rod assembly attachment

1. Attach the crank rod assembly 2 to the thread take-up cam 1, and secure
them with the 2 screws 1.
*Key point
• Align the crank rod assembly's D cut face 3 with screw hole
4.
2. Firmly tighten the screw 2.
*Key point
• Screw 2 is a left hand thread.
Start movie clip (CD-ROM version only)
1
2
3 - 38
Upper shaft unit
Set Screw (CP)
SM6.35
Screw
SM3.57-40X6 L
Torque
1.57 – 1.96 N-m
Torque
1.18 – 1.57 N-m
2 1
1
4
3
2