Displaying Optical Disc Contents
When an optical disc is inserted into a drive, the contents of the
disc display on the screen when Autorun is enabled.
To display the contents of a disc when Autorun is not enabled:
1. Click Start > Run. Then enter
designation).
2. Press
Avoiding Standby or Hibernation
Ä
CAUTION: To prevent possible video degradation and loss of audio or
video playback functionality, do not initiate standby or hibernation
while playing any type of media.
If standby or hibernation is accidentally initiated while a drive
medium (such as a CD, CD-RW, DVD, or digital media) is in use,
the following results may occur:
■
Your playback may be interrupted.
■
You may see the following warning: "Putting the computer
into hibernation or standby may stop the playback. Do you
want to continue?" Select No.
Restore from hibernation or resume from standby by pressing the
power button. Audio or video may resume or you may need to
restart the medium.
Hardware and Software Guide
enter.
Hardware Components
(where x is your CD drive
x
5–13