Operaton; Bluetooth Mode; General Operation - Craig CMA3581-OD Owner's Manual

OPERATON:

General operation:
1. Press and hold the
2. Press the Button repeatedly until the desired mode hearing from speaker as
below:
 Blue tooth ready for connection
 Blue tooth connected
 Radio
 Line in ( =Aux in )
 USB
 Memory Card
3. Press and hold the  or  Button to adjust volume level.
4. In BT; TF (SD) Card and USB Device playback mode:
 Press and release the  or  Button repeatedly to skip tracks.
 Press t the
5. When finished listening, press and hold the
BT (Bluetooth) mode
The first time you use the speaker or pair it to a new Bluetooth device, please follow
these instruction:
1. Power on the unit as previous procedures.
2. Press the Button repeatedly until "Blue tooth ready for connection" hear from
speaker. The Blue Indicator will light and blinking.
3. Power on the external Bluetooth Device and enter searching mode. Start paring
following the on screen instructions from the external Bluetooth device. After pairing,
"Blue tooth connected" will hear from speaker and the Blue Indicator will stop blinking.
Notes:
 When the external BT player searched the unit, our model number "CMA3581" will
appear on the display of the external Bluetooth Device.
 Pairing code "0000" may need to enter.
Normal operation after pairing:
1. Power on the unit as previous procedures.
2. Press the Button repeatedly until "Blue tooth ready for connection" hear from
speaker. Wait a few second until"Blue tooth connected" hear from speaker and
the Blue Indicator stop blinking.
3.
Plays the music in the connected Bluetooth Device as usual.
Button approximate 0.5 second to turn it on.
Button to pause; press again to resume normal playback.
Button to shut off.
3