Start Times Setup - Toro Lawn Master II 53805 Installation & Programming Manual

START TIMES Setup

The START TIMES setup will instruct the controller the time to activate the selected program
during an active watering day. Lawn Master II provides three start times per program to
accommodate all your irrigation needs.
Step 1 – Place the function dial to the START TIMES
Step 2 – Press
PRG
Step 3 – Press
Step 4 – Press
times, make sure
Each key -press will increase or decrease the start time by 15 minutes.
Step 5 – Repeat steps 2–4 for the remaining start times and programs as necessary.
Step 6 – Return the function dial to
IMPORTANT!
be delayed (stacked) until the current watering cycle is completed. Any stacked programs that
are delayed past midnight will be canceled.
0
to select the program being modified. Select from
or to select the START TIME number (1, 2 or 3) being modified.
or to adjust the time to the desired START TIME. For unused start
OFF
is displayed. OFF is located between 11:45pm and 12:00am.
RUN
A program which is set to start while a watering cycle is in progress will
position.
when finished.
A B C
, or .