Ending A Connection; Infrared (Ir) Connection - Asus P505 User Manual

Ending a connection

Ending a connection
Ending a connection
Ending a connection Ending a connection
Use the following methods to end a network connection.
• When connected via modem or VPN, tap
bar, then tap Disconnect
• When connected via cable or cradle, detach your device from the
cable or cradle.
• When connected via Infrared, move the device away from the
other computer or device.
• When connected via a network (Ethernet) card, remove the card
from your device.
• When connected to a wireless network using an SDIO Wi-Fi card,
switch off the connection.

Infrared (IR) connection

Infrared (IR) connection
Infrared (IR) connection Infrared (IR) connection Infrared (IR) connection
By default, your device detects incoming infrared (IR) beams and
prompts you to accept them. If you do not want your device to
detect or receive beams, clear the Receive all incoming beams
check box.
To set the Beam options: To set the Beam options:
To set the Beam options: To set the Beam options: To set the Beam options:
1. Tap , then Settings
Connections Connections
2. Tap the Connections Connections tab. Connections
3. Tap the Beam Beam Beam icon to display Beam
Beam
the Settings screen.
10-18
Disconnect Disconnect. Disconnect
Disconnect
Settings Settings
Settings Settings.
on the navigation
Receive all incoming beams Receive all incoming beams
Receive all incoming beams Receive all incoming beams
P505 Smart PDA Phone