Advertisement
Quick Links
SOLAR ELECTRIC SUBMERSIBLE PUMP
D.C. POWERED
OWNERS MANUAL
INSTALLATION AND OPERATION
SWP SERIES
MANUFACTURED BY:
Aquatec International, inc.
17422 Pullman Street
Irvine, Ca. 92614
United States of America
Phone #: (949)225-2200
www.aquatec.com
AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15
PAGE 1 OF 12
Advertisement
Related Manuals for Aquatec SWP-4000
Summary of Contents for Aquatec SWP-4000
- Page 1 SOLAR ELECTRIC SUBMERSIBLE PUMP D.C. POWERED OWNERS MANUAL INSTALLATION AND OPERATION SWP SERIES MANUFACTURED BY: Aquatec International, inc. 17422 Pullman Street Irvine, Ca. 92614 United States of America Phone #: (949)225-2200 www.aquatec.com AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 1 OF 12...
-
Page 2: Features And Benefits
SOLAR ELECTRIC SUBMERSIBLE PUMP D.C. POWERED FEATURES & BENEFITS Made in USA with proven Aquatec design and quality. Fits in any well casing 4” or larger. Pump is protected from moisture intrusion by double-oring seals Capable of pumping water from depths of up to 230 ft. - Page 3 The submersible pump is ideal for remote off the grid locations for home and livestock water needs. The Aquatec SWP- 4000 is an electric positive displacement diaphragm pump. Internal over pressure protection is included in the design of the pump to protect all components in the installation.
- Page 4 3) Move shrink sleeving to center of connectors and apply heat starting from the middle and working towards the ends. 4) A seal is achieved when material flows from the ends of the tubes. AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 4 OF 12...
- Page 5 Excessive mud, sand, silt may damage the diaphragm and could void the warranty. 10. When used in an open-source application (see fig. 3), placement in a container such as a bucket or barrel can help isolate the pump from sediment. AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 5 OF 12...
- Page 6 AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 6 OF 12...
- Page 7 AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 7 OF 12...
- Page 8 AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 8 OF 12...
- Page 9 SWP4000VHA (Includes items 22, 24, 26, 27 and 39) SWP4000LHA (Includes items 21, 23, 36, 37 and 38) SWP4000SKA (Includes item 6 ) SWP4000MTR (Includes items 12 and 41) SWP4000EBK (Includes replacement rear endbell assembly for motor) AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 9 OF 12...
-
Page 10: Technical Specifications
MATERIALS: High Grade Stainless Steel Shell, NSF Compliant, Potable Water Safe Materials TYPICAL APPLICATION: Well or Open Source Solar Water Pumping PACKAGED SPECIFICATIONS: WEIGHT: 10 LBS. LENGTH: 16.5” WIDTH: 7” HEIGHT: 6” AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 10 OF 12... -
Page 11: Troubleshooting Guide
5) Pump is worn 5) Inspect components Pump will not operate 1) Faulty power supply 1) Ensure adequate power supply 2) Wire connection fault 2) Inspect wire connections and fuses AQUATEC IMI-160, REV C, ECO# 6511, 3/16/15 PAGE 11 OF 12... -
Page 12: Warranty
Aquatec Water Systems, Inc. (“Aquatec”) warrants its products to be free from defects in material and workmanship under the following terms: All Aquatec SWP submersible solar pumps: The warranty will last for a period of eighteen months from date of manufacture. Aquatec’s obligation under this warranty shall be limited to replacing or repairing at Aquatec’s discretion, any such product or part which must be...
Need help?
Do you have a question about the SWP-4000 and is the answer not in the manual?
Questions and answers