Troubleshooting - NewAir AB-1200 Owner's Manual

TROUBLESHOOTING

Problem
The beverage cooler
does not cool.
The beverage cooler is
not cold enough.
The beverage cooler
seems to make too
much noise.
An interior red light is
flashing.
9
Possible Causes
The unit may be plugged
in using a different
voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The external
environment may
require a higher setting.
The cooler may be
placed too close to a
heat source.
There is insufficient
ventilation.
The door is not
completely closed or the
door seal is not working
properly.
The unit is not leveled.
There is insufficient
ventilation. The unit is
too close to a wall or
another surface.
The set temperature is
too low.
A Name You can Trust
Solution
Check if using the wrong
voltage.
Reset the circuit breaker
or check for a broken
fuse.
Lower the temperature
of the cooler.
Keep the cooler away
from direct sunlight or
other heat sources.
Place the beverage
cooler in an area with
proper ventilation and
clearances.
Close the door tightly. Do
not open the door
frequently and do not
keep the door open for
extended periods of
time. Replace the seal on
the door if necessary.
Adjust the unit's feet and
ensure the product is
level.
Allow sufficient clearance
around the unit.
Adjust the set
temperature so that it is
higher than the beverage
cooler's interior
temperature.