Cabling Requirements - NEC DS1000 Product Description

Section 4: Specifications and Parts List
• Do not run station cable parallel with the AC source, telex or computer, etc. If the
cables are near cable runs to those devices, use shielded cable with grounded
shields or install the cable in conduit.
• When cables must be run on the floor, use cable protectors.
• Cable runs for key telephones, single line telephones and Door Boxes must be a
dedicated, isolated cable pair.
Device:
DS2000 Cabling Requirements
Key Telephone
Single Line
Telephone
2-OPX Module
DS1000 Cabling Requirements
Key Telephone
Single Line
Telephone
Analog Door Box
(DS1000 Only)
2-OPX Module
130 N Section 4: Specifications and Parts List

Cabling Requirements

Cable Type: Cable Run
Length (ft.):
2-wire 26 AWG
2-wire 24 AWG
2-wire 26 AWG
2-wire 24 AWG
2-wire 22 AWG
2-wire 24 AWG
2-wire 26 AWG
2-wire 24 AWG
2-wire 26 AWG
2-wire 24 AWG
2-wire 22 AWG
2-wire 24 AWG
2-wire 22 AWG
2-wire 24 AWG
Notes:
1300
2000
11,500 at constant 20 mA
3150 at constant 35 mA
18,000 at constant 20 mA
5050 at constant 35 mA
29,000 at constant 20 mA
8000 at constant 35 mA
1000
650
1000
8000 at constant 20 mA
12,000 at constant 20 mA
16,000 at constant 20 mA
330
550
1000
DS1000/2000 Product Description