Reset Passwords - SATO CL4NX Service Manual

2 Operation and Configuration
When you select Service in the Tools menu, the
printer shows the Password screen.
You need to enter the correct password in order to
access the menu.
The default password to access the Service menu is
6677.
After a successful login, LOG OUT shows on the
bottom left of the Settings menu screen.
Press the left soft button if you want to log out
immediately.
Password is required to enter the settings mode
again.
Note
With password enabled, if no button is pressed for
about ten minutes after login, the login session will end
automatically. Password is required to enter the
settings mode again.
2.1.1

Reset Passwords

If you have forgotten the customized password, you can reset it back to the default password.
1
Power off the printer.
2
Press and release the
and buttons simultaneously until the buzzer beeps once.
Note
This key sequence allows users to access the settings menu with the default passwords as a temporary
solution.
After accessing the settings menu with the default password, you must customize the password again in the
System > Passwords > Change Password menu.
For more information about changing the password, refer to the chapter 4 of the CL4NX/CL6NX operator
manual.
10
CL4NX/CL6NX Service Manual
power button while pressing and holding the back button,