Audio Setting; Setting The Compression (Dolby Digital Output Level) - Sharp DV-NC55U Operation Manual

DVD Setup

AUDIO Setting

COMPRESSION ............ Use this setting for increasing the average
DIGITAL .................. Use this setting for specifying the type of
Setting the COMPRESSION
(Dolby Digital output level)
When Dolby Digital is used to record the audio on a DVD disc, the
average overall volume level of the audio is relatively lower than that
produced by an audio CD. This is to provide the widest possible
dynamic range. To counteract this, this Unit automatically raises the
overall average volume level of a disc recorded using Dolby Digital to a
level that is similar to that of an audio CD.
DVD
Dolby Digital audio
Audio CDs
• OFF .............. Audio level recorded on disc is played back without
modification.
• ON ............... Dolby Digital average audio level is increased so it
sounds similar to that of an audio CD.
Preparation
• See Watching DVD on page 28.
1
Press DVD SETUP to display the SETUP screen.
2
Use ' or " to select the "
44
volume of Dolby Digital audio when playing a
DVD.
digital output when playing a disc recorded
using Dolby Digital.
COMPRESSION:
OFF
• Low audio level
AUDIO SETUP".
AUDIO SETUP
COMPRESSION: OFF
DIGITAL: BITSTREAM
COMPRESSION:
ON
• Audio level the same
as audio CD, etc.
TIMER
POWER
TV/VCR EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION OPEN/
PROGRAM ZOOM
CONTROL CLOSE
TITLE
DVD MENU
CANCEL SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
REPLAY
AM/PM INPUT VCR DVD
100
REV FWD
PLAY
REC
PAUSE/STILL
STOP
DPSS
TAPE
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
DVD SETUP