HP C2858A Service Manual page 28

Cutting Track
10. When the front panel displays "Sheet load/Roll load," press the Down Arrow
button to select "Roll load."
11. When the front panel displays "SELECT MEDIA," press the Up or Down Arrow
button to scroll through and select the media choice. Press the Enter button to set the
plotter for the media type being used. The plotter will now load the roll of media.
12. When indicated on the front panel, raise the pinchwheel lever to the up position.
13. When "Pull
and right edges of the roll toward you until taut. Then align the left and right edges of
Download Free Service Manual and Resetter Printer at http://printer1.blogspot.com
Trimming the Leading Edge of the Media
(C) C2847-15(UM)
Loading the Leading Edge of the Media
# $
/ Align edges to roll" is displayed on the front panel, pull the left
(C) C2847-7(UM)
Figure 3-5.
Figure 3-6.
Installation and Configuration
Insert Media Until
it Buckles Evenly
Align Media with
Perforation Line
3-9