Table of Contents
Advertisement
Quick Links
––– Please read this instructions carefully before use –––
If you have questions or need help, please contact the shop where you purchased this product
Contact
or the distributor in your country first. The distributor can be found on our web site.
Only when you cannot get enough assistance from them, you can contact;
MINOURA JAPAN
(for ALL customers, including Canada)
1197-1 Godo, Anpachi, Gifu 503-2305 Japan
Phone: +81-584-27-3131
Fax:
+81-584-27-7505
Email: minoura@minoura.jp
Web:
www.minoura.jp
indoor bike trainer
* On this model, Roller-Belt can be set on either right and left side.
Warranty Period : 1 year
Made in Japan
MOZ-Roller
MINOURA NORTH AMERICA
(for the cutomers in the U.S.A. ONLY)
Hayward, California, USA
Phone: 1-510-538-8599
Fax:
1-510-538-5899
Email: support@minourausa.com
– instructions manual
(ver.1.4 2014/3)
* Bike is not included in this kit.
(9:00 – 17:00 PST)
Advertisement
Table of Contents
Related Manuals for MINOURA moz-roller
Summary of Contents for MINOURA moz-roller
- Page 1 The distributor can be found on our web site. Only when you cannot get enough assistance from them, you can contact; MINOURA JAPAN MINOURA NORTH AMERICA (for ALL customers, including Canada) (for the cutomers in the U.S.A. ONLY)
- Page 2 ● We provide limited warranty service; maximumly 1-year on roller drum and 5-year on frame. For more information, refer the included “Minoura Limited Warranty Policy” card. For the normal 2-wheel bicycle with the wheelbase between 970 and 1,090mm only. No other bikes (including mini- velo) cannot be used on this product.
- Page 3 When using the optional Foot-Step at all times, you can change it to opposite side. About Roller-Belt MOZ-Roller is different from any other rollers. The roller end cap is universal so you can put Roller-Belt to any side you like.
- Page 4 How To Assemble MOZ-Roller Required Tools: 17mm Spanner, Phillips Screwdriver Take out the Frames from the package, then distinguish the direction. The right side frame has Lock Lever to prevent unexpected folding, but any other points are same on both sides. (Fig.A) The left side hole size is always larger than right side one on either Frame.
- Page 5 Tighten Dome Nut with a pair of 17mm spanners. If you use just one 17mm spanner, you should tighten the nut on the left side first, then tighten on the right side. The nut on the roller end cap is precisely adjusted to hold the bearing at proper position. In the case you find the nut has been clearly loosened, do not try to loosen or over-tighten this nut.
- Page 6 About Front Roller Position The front roller positions is adjustable in 5 positions in order to fit your bike's wheelbase size. For your safety, set Front Roller at 10 – 15mm forward to the front wheel axle. (see Fig. F) If the front wheel axle has been positioned further than Front Roller, the bike will fall off forward very easily.
- Page 7 My Roller Belt Has Been Broken Roller Belt is made of flexible urethane material and it's universal on every Minoura rollers. It should be tough enough but if it has been broken, follow the steps below;...
- Page 8 ● Roller cover has been removed from the drum We modified the construction on MOZ-Roller so it is hard to have this problem any more, but it could be occurred. The plastic cap is glued to the alloy roller drum. If they become apart, a noise will occur.
Need help?
Do you have a question about the moz-roller and is the answer not in the manual?
Questions and answers