Summary of Contents for Stingray r82
- Page 1 English user manual © 2010 R82 A/S. All rights reserved. The R82 logo and the Stingray are registered trademarks of R82 A/S. 12.2012...
-
Page 2: Table Of Contents
Seat mounting / dismounting ...............11 Storing the Stingray ..................12 Transportation in motor vehicles ............... 13 Make the stingray ready for transport ............14 Secure the Stingray in the vehicle .............. 15 Secure the child in the Stingray ..............16 Product identification .................. - Page 3 Design Reg. no. 81500 Pat. Pend. STinGRAy congratulations on your new Stingray. it is a high quality R82 product and we are convinced that it will fully live up to your expectations. The Stingray has been designed for children, who need good comfort and support.
-
Page 4: Safety
R82 homepage/download. The warranty can only be su- stained if the R82 product is in use in the same country where it was purchased and if the product can be identified by the serial number. The warranty does not cover accidental damage, including damage caused by misuse or neglect. -
Page 5: Stingray Ready For Use
STinGRAy ReADy foR USe * Remove the Stingray from the box. * Pull up (A) to lift the backend of the frame. Make sure the frame clicks into place. * lift the push brace upwards until it clicks (B). * lock the handles (c). -
Page 6: Frame
The Stingray frame is available with: * 4 large wheels or * 2 large rear wheels and 2 small front wheels * 1-bar parking brake * 1-bar parking brake and hand brakes * 2-bar parking brake * 2-bar parking brake and hand brakes The air pressure in the wheels must be max. -
Page 7: Tilt In Space
(A) at the right side of the frame. Hold onto the back to prevent it from sud- denly moving when the handle is released. When tilting the Stingray, please be careful not to get fingers caught between the seat and frame. -
Page 8: Parking Brakes
PARkinG BRAkeS The Stingray is available with either a one-bar or a two-point parking system. Stingray with one-bar parking system: * Activate the brakes at one side by pressing down the pedal (A) kiddie boards from other suppliers can easily be mounted on this system. -
Page 9: Optional Seat System
oPTionAl SeAT SySTeM Please find descriptions on the seat adjustments on the following pages: * Back height * Back angling * Seat depth fix-lockS The seat is equipped with fix-locks for easy mounting of various vests and belts. fooT SUPPoRT The foot support should support the user and prevent them from sliding out of the chair. -
Page 10: Back Height
BAck HeiGHT loosen the handle (A) and the two screws (B) to adjust the back height. fasten the handle and the screws at the desired position. BAck AnGlinG The back angles by pulling outwards on the strap "CLICK" on the back (A). Hold onto the back to prevent sudden movement when the strap is pulled. - Page 11 MoUnTinG HiP SUPPoRTS Mounting: * Use the 5 mm Allen key to mount the holder (A) on the side of the chair * Mount the hip support in the holder (B). Please be aware that it 'clicks' into place. Dismounting: * click on (c) to dismount the hip supports.
-
Page 12: Reversible Seat
ReveRSiBle SeAT The Stingray seat is reversible 180 . The easiest ° way is as follows: * Activate the brakes (A) * Tilt the complete seat unit backwards (B) * Unlock the handles (c) * Tip the push handle upright (D) -
Page 13: Storing The Stingray
STinGRAy The Stingray compacts very easily and therefore is easy to take anywhere. There are two ways to store the Stingray: 1) with the seat on the frame 2) the seat is dismounted before storing With the seat on the frame:... -
Page 14: Transportation In Motor Vehicles
TRAnSPoRTATion in MoToR veHicleS The Stingray is approved for transporting children in motor vehicles, when the wheelchair is placed in forward-facing position. The approval is not valid on special made chairs. Restraints should The child should transfer to the vehicle... -
Page 15: Make The Stingray Ready For Transport
Stingray * Use an 5 mm Allen key to mount the two fittings (B) in the holes on the back of the Stingray. The transport fittings (B) are equip- ped with a secure symbol (c). Position the back: The back MUST be placed in vertical po- sition during transportation. -
Page 16: Secure The Stingray In The Vehicle
SecURe THe STinGRAy in THe veHicle * Mount the 4-point strap-type tiedown sy- stem in the vehicle. (follow the manufacture instructions) 30° 45° * Secure the chair to the vehicle, using the 75° 4-point strap-type tiedown system. Use either a hook or a strap in the fitting (A). -
Page 17: Secure The Child In The Stingray
SecURe THe cHilD in THe STinGRAy * Mount a hip-belt in the belt fittings in the seat and fasten the user. * Use the red seat belt guides to secure the vehicle's 3-point safety belt around the seat and user. ensure all restraints are tightly se- cured, but comfortable for the user, and that belt webbing is not twisted. -
Page 18: Product Identification
Seat: The label is placed in the right back corner. Parallelvej 3 Dk-8751 Gedved www.R82.com Made in Denmark B) Manufacturer frame: The label is placed lowest down on the inside of the push brace left bar. -
Page 19: Measurements
MeASUReMenTS Size 1 Size 2 cm (inch) cm (inch) Seat width (A) 30 (11¾”) 35 (13¾”) Seat width betwwen hip supports 18, 22, 26 (7, 8½, 10¼") 23, 27, 31 (9, 10½, 12") Seat width between knee supports 28 (11”) 33 (12¾”) Seat depth (B) 18-30 (7-11¾”) -
Page 20: Maintenance
MAinTenAnce The Stingray cushion/cover is removable and can be washed at max. 40°. Do noT spin-dry the Stingray cushion. Please calculate some time for the cushion to dry. We recommend to cleen the cushion with a damp cloth on a regular basis. -
Page 21: Technical Data
TecHnicAl DATA frame: carbon fibre and fibre glass Seat: Aluminium Plastic parts: fibre glass strengthened polyamide cushion: fire-resistant foam fabric: fire-resistant microfibre DiSTRiBUToR PRoDUceR R82 A/S Parallelvej 3 Dk- 8751 Gedved Please find your distributor on www.R82.com...
Need help?
Do you have a question about the r82 and is the answer not in the manual?
Questions and answers