Table of Contents
Advertisement
Replacing the Needle Plate
With feed teeth lowered, position the needle plate so that it
fits into the notch at the back (D). Press the needle plate
down until it clicks into place. Replace the bobbin cover.
Troubleshooting
In this troubleshooting guide you will find solutions to the problems you may have with your machine. For further information
please contact your local authorized HUSQVARNA VIKING® retailer who will be happy to help you.
General Problems
Bobbin alarm does not work
Thread cutter does not cut the thread
Fabric does not feed
Wrong stitch, irregular or narrow stitch
The needle breaks
The machine will not sew
Poor sewing/embroidery result
The sewing and embroidery machine screen and/or function
buttons do not respond to touch
When sewing in heavy and/or dense fabrics the machine
emits a distinct sound different from the sound normally
generated when sewing.
180
Clean lint from bobbin area and use only the original
HUSQVARNA VIKING® bobbins designed especially for
this model.
Remove needle plate and clean lint from bobbin area.
Enable automatic thread cutter in the settings menu.
Make sure the machine is not set for free motion sewing.
Make sure the feed teeth are not set to down in the settings
menu.
Deactivate twin needle or stitch width safety in the settings
menu.
Insert needle correctly as described, see Changing the
Needle, page 31.
Use a needle suitable for selected fabric. See Selecting
Correct Thread/Needle Combination, page 34.
Check that all plugs are securely inserted into the machine
and the wall socket.
Use only accessories designed for your DESIGNER EPIC™
machine.
Follow the on-screen recommendations.
The sockets and function buttons on the machine can be
sensitive to static electricity. If the screen does not respond to
touch, turn the machine OFF and then ON again. If the
problem persists, contact your authorized HUSQVARNA
VIKING® retailer.
The sound is not an indication of malfunction. The machine
is equipped with a pulsating needle piercing feature that helps
the needle to penetrate heavy and/or dense fabrics. The
sound is caused when the presser foot and fabric lift with the
needle. Increase the presser foot pressure to prevent the foot
from lifting.
If the sound does not seem to be related to the pulsating
needle piercing feature, contact your authorized
HUSQVARNA VIKING® retailer for service.
13 Maintenance
- Quick Links:
- Design Positioning
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Designer EPIC and is the answer not in the manual?
Questions and answers
Does epic 1 have stitch regulator
Does epic designer have a stitch regulator
The Viking Designer EPIC has the EXCLUSIVE SENSOR SYSTEM™ technology, which automatically senses and adjusts for fabric thickness to ensure even feeding. However, there is no mention of a dedicated stitch regulator for free-motion quilting.
This answer is automatically generated
i need a stretch stitch
To use the stretch stitch on the Viking Designer EPIC:
1. Go to the JoyOS Advisor™ on the machine.
2. Select the type of fabric—choose "Stretch Medium" if that's what you're using.
3. Select the type of sewing—choose "Seam" if sewing a seam.
4. The machine will automatically:
- Pick the correct stretch stitch.
- Adjust the stitch length.
- Set the correct presser foot pressure.
- Adjust thread tension if needed.
- Recommend using a size 90 stretch needle.
Then, attach the correct presser foot and start stitching. The selected stretch stitch is reinforced and will stretch without popping.
This answer is automatically generated