Table of Contents
Advertisement
OWNER'S HANDBOOK
More about Memory Suspend mode
In Memory Suspend mode your unsaved work and
the Windows environment are written to the Pedion's
memory before the power is suppressed. While in this
mode, the Power Status light is orange.
You can enter Memory Suspend mode manually,
simply by closing the LCD panel.
Note
The function of the Power button can be changed with
the BIOS Setup utility (see previous page).
Pedion cannot go into Suspend mode while the Infrared
Monitor is searching for infrared devices.
If the Resume On Modem Ring or Resume On Time
options are enabled in the BIOS Setup utility, the system
can resume automatically, either on serial port activity
(not PC Card modem) or at a specified time.
Do not use Suspend mode when connected to a network;
the system may not resume correctly.
4 / 1 0
B a t t e r y & P o w e r M a n a g e m e n t
To enter Memory Suspend mode
Close the LCD panel (without first pressing the
Power button).
To restore the system from Memory
Suspend mode
Press the Power button.
Advertisement
Table of Contents
