Related Manuals for AJA HD10AM
Summary of Contents for AJA HD10AM
-
Page 1: User Manual
HD10AM HD/SD 8-Channel AES Embedder/Disembedder User Manual June 29, 2006 P/N 101661-00 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - FAX 781.665.0780 - TestEquipmentDepot.com... - Page 2 AJA HD10AM HD/SD 8-Ch AES Embedder/Disembedder User Manual — Introduction Introduction The HD10AM is a dual rate 8 channel AES audio Embedder/Disembedder. The Disembedder is always functional, outputting group 1 and 2—or 3 and 4 (user selectable) when present on the input SDI. This is independent of the embedding process.
-
Page 3: Block Diagram
Converter HD/SD-SDI Output 2 + 5 to 18VDC Power Input Cable Not Shown To Scale HD10AM and Cable, Side View Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - FAX 781.665.0780 - TestEquipmentDepot.com... -
Page 4: User Controls
AJA HD10AM HD/SD 8-Ch AES Embedder/Disembedder User Manual — User Controls User Controls The user interface for the HD10AM is an 8-switch DIP Switch Setting DIP accessible through a cut-out in the bottom of LEFT RIGHT the unit. Use the DIP switches to configure how the AES embedding and disembedding functions. - Page 5 Switch 4 (EMBD 7/8)—Controls audio embedding for channels 7/8 LEFT RIGHT Overwrite or embed new If AUX=LEFT: Pass any channel 7/8 channel 7/8 packets packets on input SDI If AUX=RIGHT: Delete all channel 7/8 packets from input SDI Switch 5 (EMBD GRP)—Select AES channel mapping for embedded groups LEFT RIGHT...
- Page 6 AJA HD10AM HD/SD 8-Ch AES Embedder/Disembedder User Manual — User Controls Switch 6 (DISEMBD GRP)—Select AES channel mapping for disem- bedding groups LEFT RIGHT Disembed from Groups 1 and 2 Disembed from Groups 3 and 4 as as specified in 272M and 299M specified in 272M and 299M...
-
Page 7: Installation
Typically, HD10AM installation consists of the following: 1. disconnect +5VDC from the converter 2. configure the DIP switch for the desired equipment configuration 3. connect video equipment to the converter BNCs 4. apply +5VDC power to the converter (AJA power supply model DWP) Specifications Item Specification... - Page 8 AJA HD10AM HD/SD 8-Ch AES Embedder/Disembedder User Manual — Specifications Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - FAX 781.665.0780 - TestEquipmentDepot.com...
Need help?
Do you have a question about the HD10AM and is the answer not in the manual?
Questions and answers