Wi-Fi Protected Setup (Wps) - Epson PM-400 User Manual
Hide thumbs
Also See for PM-400:
- Quick manual (53 pages) ,
- Start here (4 pages) ,
- How to set up (4 pages)
Table of Contents
Advertisement
8. Press the down arrow button to view the Wi-Fi network name and password you selected.
9. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
10. Press the OK button to exit.
You see either an AP or Direct connection symbol on the LCD screen and should be able to print
directly to your product from your computer or device.
Note: If the AP or Direct connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode
is not enabled. Repeat these steps to try again.
Parent topic:
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic:
Wi-Fi Direct Mode Setup
Wi-Fi Networking
32
Advertisement
Table of Contents
Need help?
Do you have a question about the PM-400 and is the answer not in the manual?
Questions and answers
The connection to the internet keeps dropping for the pm-400. I don’t experience this issue with the WF-7820. My internet signal is very strong. Do this primer needs to be replaced?
No, the Epson PM-400 does not necessarily need to be replaced if it keeps dropping the internet connection. The manual suggests troubleshooting steps for network problems, such as checking the router, ensuring compatibility with a 2.4 GHz network, and resetting the router. If issues persist, further troubleshooting or contacting Epson support may be necessary before considering replacement.
This answer is automatically generated
Thanks for your response. I have already completed a lot of troubleshooting. When I first started working on this issue it would not connect to the internet. Also, as previously mentioned I have an epson workforce 7820 all in one that connects without issue to the internet. The router isn’t the issue. The issue is with the PM-400 printer. Please provide the email address and phone number to customer support. Thanks