Hints And Tips; Fault Code; Technical Problems - Currys Essentials CID45B13 Instruction Manual

Hints and Tips

• Repairs should only be carried out by a qualified technician in strict accordance with current
local and national safety regulations. Unauthorised or incorrect repairs could cause personal
injury or damage to the unit.
• Before calling for service, please refer to Helpful Tips to solve some general problems by yourself.

Fault Code

Codes
Water tap is not turned on.
Low water pressure (<0.04MPa)
Rapid
programme
light is
Flow meter is broken.
blinking
The wire terminals which connect the
flow meter are loose.
The tank is leaking.
Eco
programme The hose is leaking.
light is
The float switch is broken or PCB is
blinking
faulty.

Technical Problems

Problem
The dishwasher does not start.
The drain pump is not working
properly.
Possible Causes
Technical Problems
Possible Causes
The door is not properly
closed.
The unit is not connected to
the mains socket.
The unit is not switched on.
The anti-flooding system has
operated.
Remedy
Turn on the water tap.
Turn on the water tap and ensure it is in full
position.
• Disconnect from the mains socket.
• Disconnect the water inlet.
• Call a qualified technician.
Remedy
Close the door firmly.
Connect the mains plug to the mains
socket.
Press the ON/OFF button and select a
programme.
• Disconnect from the mains socket.
• Disconnect the water inlet.
• Call a qualified technician.
31