How To Change An Oven Light Bulb; How To Move The Range For Servicing - La Cornue CornuFe Service Instructions Manual

1

How to change an oven light bulb

Turn off the power at the circuit breaker
Make sure the oven is cool. Open the oven door and remove the oven racks.
Screw in the new bulb, screw back the bulb cover. Turn on the circuit breaker and check that the bulb now lights.
2

How To Move the Range for Servicing

Follow these procedures to move the range for servicing:
Shut off the gas supply and disconnect electrical supply to appliance. Disconnect gas supply tubing to appliance
and unplug the electrical supply cord.
NOTE: A qualifi ed person should disconnect and reconnect the gas supply.
The range is very heavy. Take great care. We recommend two people manoeuvre the range. Ensure that the fl oor
covering is fi rmly attached, or removed to prevent it being disturbed when moving the range around. You will
need the leveling tool.
Pull the drawer out to its furthest
point and empty it.
For safety's sake push the drawer runners back out of the way. Put the drawer somewhere safe - do not refi t it until
you have fi nished, you will need access to the area behind the drawer.
SERVICING  WARNING  WORK SAFELY
Where necessary disconnect from electricity and gas before starting.
Check range is safe when you have finished.
Replacement bulb must be 15w 125-130v lamp, FOR OVENS, heat resistant to 300°C (570°F).
Unscrew the bulb cover by turning counter clockwise. It
may be very stiff .
Taking care to protect your fi ngers in case the bulb should
shatter, unscrew the old bulb.
13
Lift up the ends of
the plastic clips (one
each side) to release
the catches holding
the drawer to the side
runners and at the
same time pull the
drawer forward and
away from the side
runners.