Download
Share
Print this page
Elite Fitness IT 9310-E Owner's Manual
  1. Manuals
  2. Brands
  3. Elite Fitness Manuals
  4. Fitness Equipment
  5. IT 9310-E
  6. Owner's manual

Elite Fitness IT 9310-E Owner's Manual

Deluxe inversion table
Hide thumbs

Advertisement

Quick Links

Download this manual
Deluxe Inversion Table
Model IT 9310-E
CAUTION:
WARNING: Do not use this
inversion table without a
physician's approval.
Do not let children use the
inversion table unsupervised.
Read all instructions carefully
before using.
Tighten all bolts before using
equipment.
Leave adequate space to
properly invert.
.
Questions/ Comments
PLEASE DO NOT CONTACT THE
STORE
Elite Fitness is committed to
providing the very best of quality
and customer satisfaction for all of
the products we distribute. If for
any reason , you are dissatisfied
with the product you have
purchased or need assistance in
any way, please do not hesitate to
contact our knowledgeable support
623-888-6379
staff at:
Mon.-Fri 8:00 am – 6:00 pm Pacific Time
Photo may differ from actual product
1
Owner's Manual
Version: 10114

Advertisement

loading
Need help?

Need help?

Do you have a question about the IT 9310-E and is the answer not in the manual?

Questions and answers

Related Manuals for Elite Fitness IT 9310-E

Summary of Contents for Elite Fitness IT 9310-E

  • Page 1 Leave adequate space to properly invert. Questions/ Comments PLEASE DO NOT CONTACT THE STORE Elite Fitness is committed to providing the very best of quality and customer satisfaction for all of the products we distribute. If for any reason , you are dissatisfied...
  • Page 2 BEFORE BEGINNING ASSEMBLY… Take a few moments to familiarize yourself with the specific parts and hardware included with your product. Make sure all the parts and hardware are included in the carton and examine them for any damage that may have occurred in transport. Some parts may be pre-assembled and pre-installed. CAUTION WARNING: BEFORE STARTING ANY INVERSION PROGRAM, CONSULT YOUR PHYSICIAN.
  • Page 3 Parts Listing Part# Description Check Part# Description Check Top Base frame-LEFT Leg Tube Adjustment Knob Top Base frame-RIGHT Foam Leg Rollers Bottom Base frame-FRONT Round End Caps Bottom Base frame-REAR Hexagonal Bolt-M8*15mm Support tube-FRONT Hexagonal Bolt-M8*50mm Support tube-REAR Metal Bushing for Rear Leg Tube Handlebar Safe-T Bar Backrest Support frame...

  • Page 4: Exploded View

    Exploded View * For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com * For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com...
  • Page 5 Base Frame and Handlebar Assembly STEP 1- Base Frame Unpack Base frame from Carton. Attach (1L) Upper Left A- Frame into (2L) Front Left Base Frame and (3L) Right Rear Base Frame. Repeat for Right Side of Frame. Connect the Rear Section of the A-Frame using 2 Bolts (18) 2 Washers (16), and 2 Nuts (17) on the left and right side.

  • Page 6: Handlebar Assembly

    Handlebar Assembly STEP 2 Attach the Handlebars (6) to the Rear Base Frame (1L) and (1R) Connect using 2 Bolts (19) 2 Washers (16) and 2 Nuts (17) on each side as shown. Insert Safety Pin (21) into Right Side of A- Frame to prevent frame from folding TIGHTEN ALL BOLTS AT THIS TIME...
  • Page 7 Backrest Assembly to Base Frame Right Attached the Backrest Frame Rotational (7) to the Left and Right Brackets Rotational Brackets using 2 MUST POINT TOWARDS FLOOR bolts (20) 2 Washers (16) and Left 2 Nuts (17) on each side Rotational Brackets MUST POINT TOWARDS FLOOR...
  • Page 8 Connecting Backrest Pad to Backrest Assembly Connect Backrest Pad (8) to the Backrest Assembly (7) using 4 Bolts (9) 2 Washers (16) TIGHTEN ALL BOLTS AT THIS TIME * For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com...
  • Page 9 STEP 4-Body Height Adjustment Tube and Rollers Install Foot Rest Plate (13) into Height Adjustment Tube (10) using 3 Screws (27) 3 Washers (16) Extend out Front Roller Tube 11 and position as indicated. Attached Rear Roller Tube (12) through hole in Height Adjustment Tube ( 10) and connect using Bolt (28), Spacer (29) , Washer (16) and Nut (17).

  • Page 10: Step 5-Final Assembly

    STEP 5-Final Assembly Slide Completed Lower Ankle Roller and Height Adjustment Selector Rod into the receptacle of the Backrest Support Assembly. Make Sure Height Adjustment Knob Bolt ( 23) snaps into place, and is then secured with Safety Pin (23). Position Inversion Bar into 1 of the 3 Rear Position...
  • Page 11 PRECAUTIONS WARNING: 250 LB WEIGHT CAPACITY To reduce the risk of serious injury, read all important precautions instructions and warnings in this manual before using the Inversion System. Extreme Products Group assumes no responsibility for personal injury or property damage sustained by or through the use of the Inversion System.
  • Page 12 USAGE GUIDELINES- Securing Feet and Ankles WARNING: ALWAYS WEAR ATHLETIC SHOES WITH LACES TIGHT TO HELP SECURE YOUR FEET IN THE INVERSION SYSTEM, AND FOR FOOT PROTECTION WHILE EXERCISING. ALWAYS MAKE SURE THAT THE ANKLE LOCK IS SECURED SNUGLY AGAINST YOUR ANKLES AND THAT THE LONG KNOB IS FULLY TIGHTENED BEFORE YOU USE THE INVERSION SYSTEM Step 1- Expand the front rollers by pulling up on the...

  • Page 13: Usage Guidelines

    USAGE GUIDELINES Finding the Proper Height and Weight Adjustment With head flat on back pad, slowly raise one arm up toward the ceiling. If the bed starts to invert backward, the height adjustment should be correct. If the bed does not start to invert, adjust the center slider arm upward one position at a time, until the bed starts to invert backward.
  • Page 14 Distributed By: Extreme Products Group 6635 W. Happy Valley Rd. Suite A-104, #213 Glendale, AZ 85310 Phone: 623-888-6379 Fax: 623-434-9100 service@extremeproductsgroup.com Note: For all parts requests, please visit our web site: www.extremeproductsgroup.com...