Mitsubishi Electric MH2850U Specification Sheet

MULTIMEDIA DATA/VIDEO PROJECTORS
SXGA+
projector for medical use
NEW
MH2850U
The Key to Precision Medical Image Projection
The combination of virtual DICOM mode and
SXGA+ resolution ensures high de nition crystal-clear
and close gray scale for medical images like X-ray
photograph, CT and CR and this projector is ready
for you right out of the box. Install the unit in
conference rooms for use in pre-operation conference,
traning for trainee doctors and other broad-based
applications spanning the medical image projection
scene. MH2850 has preset picture setting suitable to
X ray photo. Clear Base mode is designed to look
X-ray photo in CLEAR BASE. BLUE BASE mode is
designed to look X-ray photo in BLUE BASE.
Auto mode Virtual DICOM mode
Supported by our optimum design for light source lamp
temperature control, maximum light source lamp use soars
to 5,000 hours.* This makes dramatic reductions in running
1
cost, while likewise slashing replacement hassle for the light
source lamp as a consumable part. *
2
(*1): When used at the low lamp mode. Maximum lamp life at standard mode use is 2,000 hours.
(*2): Lamp life refers to the average time required for brightness to be reduced by half, and not the
time speci ed in the warranty. Use time may vary widely by the environment and conditions, and
whether or not cleaning and other maintenance procedures are followed.
Supporting
the evolving frontlines of healthcare.
Super-bright SXGA+ Projector
Our new-generation panel takes brightness to 3100lm
The new-generation panel, with inorganic orientation
lm and normally black. Because high
contrast via normally black and inorganic orientation
lm requires no lubbing process, immaculate
brightness of 3100lm is realized with crystal-clear
picture quality void of vertical stripe noise. What's
more, packing twice the service life of organic
orientation lm, our stingy degradation ensures
enjoyment of high-quality images for the long run.
Long Life Lamp ~ Maximum 5,000 hours
Lamp Replacement Frequency*
2,000-hour
replacement
lamp
5,000-hour
lamp
2
1st 2nd 3rd
replacement replacement
Reduced
1st replacement
running
cost
2,000 hours 4,000 hours 5,000 hours
Lamp Side Replacement
The lamp may be removed
from the side of the projector
unit. This simpli es
replacement without turning
the projector around or over
when suspended from the
ceiling or resting on a shelf.
Handles Optional Lenses Too
Besides the standard lens,
the MH2850U is also engineered
to use various optional lenses.
Choose the lens that best ts
your installation parameters.
OL-XL2550MZ