Universal Remote Control; Programming The Universal Remote Control - SAGEMCOM RCI88-1000 V2 User Manual

9 Universal remote control

The remote control is a universal model. You can program it to control your TV as well. The supported
devices are listed in the Brand Code List.
After programming the remote press
mode. The LED flashes once in short interval. The LED also flashes after each command is transmitted to
the TV.
These are the main controls for the direct control of your television:
• Standby/Wake up
• Volume up / down, mute
• Changing channels, keys P+ and P-
• Four arrow keys
• Access to the TV menu, key
Press to return to Digital HD-Video-Recorder mode.

9.1 Programming the universal remote control

Refer to the brand code list for the right four-digit code for your TV.
1. Turn on your TV.
2. Press
flashes two times.
3. Enter the 4-digit code for your TV or the universal code. Make sure that not more than 10 seconds pass
between the entry of each number. After entering the first 3 digits the LED flashes one time in short
interval. After the fourth digit the LED flashes 2 times short and then remains lit.
4. Press until your TV turns off.
5. Release the
6. Press
7. Press
If you do not see your TV in the code list, please enter the code "0000" in step 3 and keep
until your TV turns off. The remote control now starts a search through all the available codes. This
process may take some time.
, , , ,
and at the same time for at least 3 seconds, until the LED on the remote
key.
for 3 seconds to confirm the code.
to use your TV.
to switch from Digital HD-Video-Recorder mode to TV
71
RCI88
pressed