Table of Contents
Advertisement
10
Troubleshooting
Symptom
The unit does not work
No haze output
No response to the DMX controller
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Remedy
Check the mains connection and the main fuse.
1. Check the fluid level in the fog container.
2. Switch the device off and check the hose that leads into the fluid container
for flow.
3. Check the settings of the DIP switches.
1. Check the address settings and the DMX polarity.
2. Try using another DMX controller.
3. Check to see if the DMX cables run near or alongside to high voltage cables
that may cause damage or interference to DMX interface circuits.
Hz-200 DMX
Troubleshooting
31
- Quick Links:
- Dip Switch Operation
- Operating Mode 'DMX
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Stairville Hz-200 DMX and is the answer not in the manual?
Questions and answers
The LED in the bottle is flashing red and machine isn’t doing anything… any suggestions?
A flashing red LED on the Thomann Stairville Hz-200 DMX indicates that the device is warming up. Once the required operating temperature is reached, the LED will go out. No action is needed unless the LED keeps flashing indefinitely, in which case checking the power supply and connections may help.
This answer is automatically generated