Assembly; Suction Seal Assembly - Hammerhead ONGA Owner's Manual

Assembly

Suction Seal Assembly

Pull Suction Seal over the cleaners Foot Pad so that it will fi t properly into the Foot
Pad's groove as shown in illustration #1.
Ensure that the curved tips of the Suction Seal face upwards.
Ensure that the Suction Seal rotates freely.
Weir Component Assembly
90 Degree elbow
Certain Skimmer Boxes may not require the
insertion of the 90 Degree Elbow.
If the fi rst length of pool hose can be inserted
into the valve.
Insert the 90 Degree Elbow into the Regulator
Valve as shown in the illustration.
Regulator valve
(insert into weir)
4