Figure 2.46 Inventory List; Using Inventory Lists - Fujitsu ETERNUS LT260 User Manual

Chapter 2 Operating the Library
2.8 Viewing Status Information
2.8.2

Using Inventory Lists

The inventory lists display each of the elements, such as slots and tape drives, with information about the car-
tridge stored in the element. To see the elements organized by module, from Status, navigate to Cartridge
Inventory > List View. To see the elements organized by logical library (or partition), from Status, navigate to
Partition map > List View.

Figure 2.46 Inventory list

In the Inventory List you can see:
• Module
The module number
• Slot #
The slot number in the form <module>.<slot>, where module is the module number and slot is the slot
number
• Barcode
Barcode label
• Full
X if a cartridge is using the element
• Gen.
LTO generation of the cartridge
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Panel Operation-
71
Copyright 2016 FUJITSU LIMITED P3AM-8802-04ENZ0