Installing The Optional Network Interface Card - Kyocera FS-1920 Service Manual

2FP/2FY/2FR

1-3-5 Installing the optional network interface card

The main board of the printer is equipped with a network interface card slot (KUIO-LV type, 3.3 V).
If the serial interface board kit is installed, remove it to use the network interface card.
CAUTION
Take precautions that no foreign substances such as
metal chips or liquid get inside the printer during the
installation process. Operation of the printer during the
presence of a foreign substance may lead to fire or
electric shock.
WARNING
Turn the printer's power switch off. Unplug the printer's
power cable.
Procedure
1. Turn the power switch off.
2. Remove the two screws then remove the option
interface card slot cover.
3. Insert the network interface card to the option
interface card slot.
4. Fix the network interface card by two screws.
5. Connect the network cable to the network interface
card.
6. Set the network address from the printer operator
panel. (Refer to the printer's user's manual)
Network
interface card
Network (ether) cable
1-3-12
Figure 1-3-16 Installing the optional network interface card
Option interface slot
Network interface card
Option interface slot cover
Screws