You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
Change the number by highlighting it and using the Up and Down arrow buttons to increase and decrease
the number. The PTZ ID number can be set from 0 to 256.
Highlight the Setup... box and press the
You can save your PTZ changes by highlighting Save and pressing the
the screen without saving the changes.
DEVICE SETUP
You can configure the audio, alarm, display and remote control devices connected to the DVR.
Select your camera from the list and press the
connect the camera to the RS232 or RS485 connector on the back of the DVR
following the camera manufacturer's instructions.
button. The Port Setup window appears.
Configure the port's setting based on the PTZ camera manufacturer's instructions.
Figure 28 ─ Device Menu.
Digital Video Recorder
button. You will need to
button. Selecting Cancel exits
button.
37