Table of Contents
Advertisement
Operating Instructions
Busch-ComfortTouch
Pos: 15.6.43.1 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/G - L/IR-Fernbedienung @ 34\mod_1361800213833_15.docx @ 283472 @ 3 @ 1
5.4.13
IR remote control
Pos: 15.6.43.2 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Bedienung/KNX/KNX-Aktorik/ComfortPanel 3.0/Bedienungsanleitung/Erläuterung der Funktionen/IR-FernbedienungIR-Fernbedienung @ 40\mod_1418733370592_15.docx @ 309801 @ @ 1
The Busch-ComfortTouch
of the Busch-ComfortTouch
functions are predefined in the Busch-ComfortTouch
planning software. Programming of a new IR remote control is also possible on the device later.
1. Press the "IR remote control" icon in the navigation bar to access the function.
The functions suitable for the IR remote control are described on the left.
2. Press an entry in the list and then "Programming" to assign this function to the remote control.
A time of 5 seconds runs down.
3. To occupy the button with the respective function, press a button on the IR remote control during this time.
Point the remote controlg in the direction of the Busch-ComfortTouch
successful, a tick appears in "Assigned".
4. Select an entry from the list.
The assignment can also be deleted at any time.
5. Then press "Reset".
When this process is successful, the tick is removed from "Assigned".
Pos: 15.6.44 /Layout bis 2014-11-11/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1
Operating Instructions | 1473-1-8041
®
®
can be controlled via an RC5 or B&O capable remote control. To do this, the functions
®
are assigned to the buttons of the IR remote control. For this the available IR
®
by the electrical installer with the aid of the project
®
during this time. When this process is
Operation
— 72 —
Advertisement
Table of Contents
